Kresell
-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Kresell
-
-
No mod works in "temp control" with Kanthal alone! There was that one US company that said it did but it was BS (why they don't make it anymore). Yes, Replay is TC but without picking any wire or setting TCR for people who didn't like doing that. It's simplicity of TC and better that's it. If you use SS then you are fine then.
- 1
-
23 minutes ago, BillyBoyle said:
I thought the whole point was using it on Kanthal, or did I miss something?
Nope, no mod works with kanthal alone. Has to be a temp control wire or a combination of SS and kanthal, Ti and SS orNi200 and kanthal will work... It's for people who couldn't figure out TC or thought it was a hassle to set it up. Just adj the watts and forget it that's the point.
- 1
-
-
3 minutes ago, T.A.Nettles,V said:
It's easier if you used the default theme and change the Name to Replay too.
-
Using the stock, for now, there will be ones to download is a day or so.
- 1
-
Boards are boards they are the same just the firmware. Install the international ver. and you get Replay.
-
32 minutes ago, HPloco said:
Ummmm ... its heeereeeee
Thanks, works great...
-
14 hours ago, Bob R said:
Hi Kressel,
I did buy the 250 C (Lost Vape Paranormal) and am using it, it is a very good progression that is easier to use than TC, It also gives excellent flavour on my RDA's however my 75C (Lost Vape Therion BF) is a BF Squonk mod and the flavour is a little bit better but that is in T/C.
I want to try 'Replay' on a Squonk mod with my favourite RDA and Juice as I believe it may be even Better!
The Video stating Replay would be released for the 75C stated things would happen 'when everyone returns from Chinese New Year' and that was the middle of February. It is now almost the end of April, over Two months down the line and still no update!
I believe it is a ploy by Evolv to create demand for both boards or otherwise why mention the '75C upgrade' till the 250C sales hit target?
People will still want one or both of these awesome chips so it is really just advertisement of their new product.
That said I still think Evolv are dragging their feet more than a bit and are starting to really annoy their Loyal Fan Base with these delays.
4No, they said the new DNA 250C mods would be coming out after the Chinese New Year and then the update for the 75C later. What ploy? They are in the business of selling boards so yes they want to sell the new chip first and then update the 75C. That's business, I have no problem with that it only annoys those who want everything NOW. It's a function to make TC easier for those who use it, that's all. Flavor is not going to be better that is up to your build.imho
-
Lost Vape is a partner who buys boards from Evolv like other mod makers. The only one who really knows when the update for the 75C is released is Evolv. The 250C with replay has only been out for what 4 months and people want to experience replay. I would think they would see how the feedback is first before they push it to the 75C. I have seen people say they bought a mod with the 75C to get replay. For those, I would ask why not just buy one with the 250C board if you are not willing to wait for the release for the 75C? Just a little patience is needed really...
-
If they are 2-2.5mm that's your problem it's too small for coils like that. Single wire ok for 2-2.5mm, complex coils no it's hot. Vape shop coils they probably are the mass produced China ones. Try to expand them to 3mm on a rod.It's not the type of wire it's the ID size v mass of the coil. You can get Ohmland on their website. I use prefer SS (I like TC sometimes) but use anything.
-
If you are using pre-made China coils like Juggernauts they don't work well I have a bunch of them. I have used Staplestaggerton, Staple coils no problem. What ID is the coils personally I like 3mm for everything if they fit? Ohmland coils are outstanding they are almost all I use. Have you tried less cotton?
-
ryanzurrin said:
What is that used for? The battery analyzer test on escribe? I don't got to have nothing like that do I?
No all you need is an rda with a loop of wire around 1ohm set the analyzer to 40 watts and let it run. That's all I have been doing for all my mods. I do set a fan near the mod to keep it cool . -
mikepetro said:
The last few "Release Notes" are in Post #1 of this thread.
https://forum.evolvapor.com/topic/66731-topic/?do=findComment&comment=900118
Temp Dominant changes the control action (Display and the +/- buttons) to adjust temp by default instead of watts. I find it rather handy as I always leave my Mods on 200w and then let temp control it. So in day to day use, I just adjust temp.
Note: turn it off if you are running Kanthal, it is only of value if you are running temp sensing wire.
Just tried it on Ti works great..Thanks. -
blueridgedog said:
It allows you to have access to the three types without profiles or a computer. It is not related to profiles and you can still only have 8.
Thanks. -
With the new firmware what's the purpose of holding all three buttons.Is it just to quick change to different wire types on the fly and not use profiles? Or if you had more than 8 setup already?
-
I just receded a VT200 a day ago. Go to this site and follow the instructions to install his setup settings. It adds more functionality to the mod I love it. https://www.djlsbvapes.com/dna200/
-
tommrussell said:
so how do you clean the coils?
I remove the cotton run hot water over the coils and use a ss or brass brush takes all the gunk off. I have had coils for months and still use them, do the same for SS coils. -
James said:
Win10/IE SmartScreen is not an antivirus.
Not smartscreen Windows Defender. -
Wingsfan0310 said:
If you have Comcast/Xfinity then Norton comes free (it's included at no extra charge). Another thing that comes to mind, if Win 10 is giving you an erroneous warning, wouldn't the antivirus program that comes with it give you the same warning. One last thing since Win 10 is new and you gave up on Norton years ago, how do you know the Win 10 antivirus is superior to the newest version of Norton? Just curious.
Been using windows defender for years no problem. Yes the ISP gives it to people mine does the same mcafee. All these do is give you false positives. The window built in updates daily with less problems as 3rd party programs. -
Stop using Norton you have Win 10 use the built in antivirus it works better anyway.Gave up on Norton years ago on all my machines ,waste of money.IMHO
-
Hotcig, vtbox200 is the problem they have no clue what they are doing.The DNA 200 is different than your generic Yihi or even DNA 40 18650 mod. I would only use Gearbest for an atomizer or some simple $50 knock around mod, FT forget it never.Good you get it sorted out.
-
Polo65 said:
Love the look of the Efusion200, I think I will pull the trigger on one when they become available. First off I need to wait until my whiteout, is in my hands the wait is killing me but I am sure it will be worth it. I don't think I can wait any longer though I need a 200 now ,so going to have another look tonight to see if there is any other 200s available in UK, and if so I will have to buy. This means I am going to end up with 3 DNA200, in my collection which will probs grow even more. I can see divorce on the cards ha ha
I'm also waiting on the Whiteout. With the changes to how the panels are attached to it now ,this Efusion looks better imho. And the battery is larger for less too ...Starting to wish I had waited... -
It's easier to just rebuild the coils on nickel kanger tanks. What you don't want to dry burn is Titanium. I rinse my RDA ones with hot water and use a toothbrush works great.
-
Hate to say it but the VT 200 guys are not the best manufactures.With the problems with the first batch it looks like this was there first shot at mod making.Hope the vendor can help you out.
OK, So WHEN is this NEW software for the 75C coming out?
in General Discussion
Posted
I had to look for this. It says it comes set at 5 and just leave it that way. I have never changed it, you can adjust the boost if you need more power. If you hover over it there is an explanation.