Boobaru03
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by Boobaru03
-
-
Wayneo said:
Not wanting to sound funny, but the Vaporshark DNA133 does have the DNA200 board in it.
It does, however removal of the sled/chip assembly would have to be different due to the placement of the sled and the way the battery door opens. I had all 3 of the chip cover screws out and the single screw that attaches the top of the sled to the body and was able to wiggle the sled/chip assembly up on the cip side but the left side of the sled just wouldn't budge. I didn't want to break the sled just to remove the sled/chip assembly. -
Wayneo said:
Go check if there are any disassembly videos on YouTube.
I already did, all of the links that I found were for the DNA200. -
Hi all, My first post here and of course I am the one for a difficult question lol
So my 133 has been trust and true for a few months now and about 2 weeks ago my original Glacier RDA center post insulator finally decided to go out, causing a large amount of e-liquid to leak through my 510 and down onto the board and screen. I have fixed the center pin on the rda but i fear that the liquid is leaked down into the device due to a screen malfunction the past 2 mornings.
Does anyone have any insight as exactly how to remove the chip/battery sled?
Thanks in advance!
Vaporshark DNA133 dissasembly
in Manuals, Instructions, and Tutorials
Posted
That's what I thought, Yeah the device was purchased about 2 months ago so i'm pretty sure that I am still within my warranty. I just didn't want to have to send it off and be without it while they were servicing it. It looks like I may have to go that route though.