evripidis
-
Posts
14 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by evripidis
-
-
so im thinking of builng a new battery cover. shall i or is it worthless since the new one is gonna chip off too? also does any1 knows where i can find a case or a compatible case to buy?
-
did only the paint from the battery cover peel or from the body too?
-
hello, any1 else having problems with the grey paint on thei therion chipping off? mine started to chip on the battery door. at im one of thise who want my vape stuff mint condition, at least there are replacement covers
-
therion's stock profiles are all with the ni curvefryjc said:
I also cannot get it to work on my therion. I'm also having issues with my tc on other actual tc coils. -
does a1 preheat works on the latest dna75 firmware? i cant make it work on the therion.
-
do you use kanthal as a material or just power setting?
-
so i throw away the ss316L profile and i use the ss316 material that comes with escribe and that should do with 316 and 316L. imo in order to get a good regulation on ss you need higher ohm coils over 0.4.
-
im very new to the dna situation, although i learned escribe excelent i still have to figure out whats going on with the firmware updates. i will just update when escribe tells me to right? i set my profiles to pwr, ni, ti, ss all set from the steamengine curves. i also made a new material ''empty'' to use on the non set profiles. one last thing preheat on kanthal doesnt seem to work. any1 have some profile to share or its the latest firmware that cant do it?
-
these settings came ready for mine http://prntscr.com/cbzxnd at least the mod's resistance should come from the manufacturer. lost vapes build quality is very good only thing with this mod were the innacurate profiles thats not a big deal. i would prefere empty presets then innacurate. i use kanthal most of the time and sometimes ss316L.
-
so i used a different graph for ni ss316 ti and kanthal(not nessecery i know) for the ss316L i used the tcr 0.001 should that be ok? seems the stock therion configuration is not accurate.
-
Done! thnx again mate. i also noticed that when i go to materials the preset wires: ss316L, ss30,4 Ni200 and ss430 all have the same graph. i assume that is wrong? to set up a new material i simply put my wire on steamengine download the csv and use that right??
-
thnx VapingBad i set the cutoff to 2.75 LiPo
-
Hello, my therion's battery settings are set to default at LiPo and soft cutoff to 3.1 does that affect the performance, battery charging and battery health?? should i correct those settings? I'm using 2 brown LGs. Thnx in advance.
Therion paint
in General Discussion
Posted
i already have a spare dark brown but im keeping it till a sillicon or leather case hits the market