-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Vap3on
-
-
Vapegeek have excellent service Rob is all good! The Efusion is a good unit its more of a pure box mod for me after trying a Rolo its got great battery life but the weight, colour scheme and ergonomics are the negatives for me t but I am moving away from high power lung hitting and who hasn't got 30 mods to swap when the lipo is flat The cheap RX200 looks great in black i just can't understand why Rolo went with the crappy colours on the DNA200 its like the 1980s or 2014 (Sx mini S class) and we are back to a zinc body which never holds it paint well. I have my doubts I will be able to stick in a DNA200 in the RX200 but we shall see and they are so cheap its worth ago!
-
I have one I bought in a GB back in August its one of the infamous first 200 red and black ones with the glued 510s I couldn't be bothered to send it back for a replacement as it worked from unboxing and has continued to work to date. The lipo hasn't shown any problems here but I suspect it may be foobar in yours, the problem you have is finding another to swap out and fault find due to the power plugs Vapecige chose to use. Post your escribe dump of the device monitor, do you have another lipo you could test it with?
-
Gutted for you lex! I wanted that mod off you as well! it, i have not had any grief with any chargers but those multi travel units can be suspect! Hope you sort it when you get back to blighty!
-
Yup either I damage the screen or it was faulty from new but a new screen fixed all problems.
Many thanks for everyone's help! -
@KTM You are the second person to say this today and something tells me given how tight and tricky getting everything installed is in this case. I may have done that I have a spare screen and board so will have a look next week!
Hope you get another screen sorted! -
It would be fantastic if you could offer Li-HV charging option there are a few companies announcing these even the current Turnigy Bolt series are Li-HV. (4.35v)
As you can appreciate getting maximum vape time out of the battery is good, if for example we take your own reference DNA200 case using a G6 900 Li-HV would yield approximately 25% more capacity than your reference Flightmax 800 Lipo.
You could use a multiple disclaimer dialogue box on selecting this option in escribe much like YiHi did when they released the SX350 60W firmware and the requirement for upgrading the wiring before applying the update.
Using this option would explicitly be at the user own risk. -
-
-
Looking for help I ordered a 200 a couple of weeks ago here in the UK.
Mod built yesterday after waiting for the 3D case to be printed.
Screen blanks on firing randomly, sometimes it's blank on firing 5 times in a row then it stays on for 1 or 2 fires then blank then on. The frequency is random.
The problem is the same with no Atty or Atty attached, reflashed to latest firmware, reset the board, hard reboot its always the same.
The board always fires even when blank, there is no screen glitching. The only issue is on firing.
Anyone have any ideas?
-
Does anyone in Europe have any idea what equlivalent screw sizes will work in a 3d printed reference case? The 0-80s board mounts seem to be m1.6 ? 5 and the 2-56 case screws m2.2 ? 20 we have m2 and m2.5 here will m2 be too small for the case screws?
-
Thanks for the post mamu, what size of wrap do you use for the Turnigy 950mAh pack?mamu said:If you're familiar with soldering and working with lipos, it's fairly simple to replace the 20AWG with 18AWG with the Turnigy nano-tech 950mAh 25C lipo pack as the +/- wires are easily accessible.
Here's one I did... just make sure you always have the lead you're not working with covered and protected. Then heat shrink the pack when you're done.
DNA 60
in General Discussion
Posted
Does anyone know when the DNA 60 will be available in Europe? I Was told October now we are in the middle of November is it likely it will before 2017?