RedLabel
-
Posts
26 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by RedLabel
-
-
With my second Lipo AND with cable conected to Escribe, it try to charge battery.
But it shows 0.01A charging .....
-
When i changed Lipo with a second one, a good one, device turns on and battery bar is not empty at all ... i conected to Escribe and i made a print screen to Device monitor....
I attached a CSV file with device monitor with my second Lipo.
-
I don`t know what is the problem with it.
When i disconect Lipo and conect to Escribe.... device turns on but battery bar is empty. When i click fire it shows Check atomizer.
If i try to conect an atomizer, my laptop display flashes and appear a lot of noise on laptop speakers....
-
Hello, when i am bridging fuse with a pair of tweezers, it appear some sparks and if i press fire button, device turn on and show warranty service.
After i take tweezers off.... device don`t turn on anymore.
What does this means?
Thank you. -
CSV file from device monitor...
-
Something happened.... after i updated firmware... on my Device Monitor....cells voltages are not constant.... do you have any ideea?
-
Firmware update done.
Lipo settings after updated firmware.
-
if cable is not conected and i LONG PRESS fire button.....nothing appear on screen... black screen ...
-
Question... when cable conected and device it turns on....when i`m screw an atomizer almost it burns my laptop....laptop display fluctuates and a lot of noise on speakers........i unscrewed it fast !!! .... what happened?
-
When cable conected and i press fire it shows check atomizer
-
If cable is not conected.....nothing appear on screen....black screen.
If cable is conected....device it turn on and battery shows empty.
https://www.youtube.com/watch?v=F1gENuPRP0g
-
Sorry but i don`t have tools to do that ...
Here is a printscreen with device monitor.
-
Hello again.... i have again problems with my second Panzer box mod DNA200... I think fuse blow.... can you help me?
I will attach some photos and a youtube video.
https://www.youtube.com/watch?v=F1gENuPRP0g
Thank you.
-
Evolv helped me and changed my DNA200 board!
Thank you very much Evolv !!!
Great company, great people, great products! -
Evolv helped me and changed my DNA200 board!
Thank you very much Evolv !!!
Great company, great people, great products! -
Thanks guys ... Eric from Evolv contacted me and helped me with this DNA board ... i sent board to USA for changing it ... now i`m waitting it.
Evolv = Great products.... Great services....Great People ! -
Thank you !!! I noticed that !!! ... good advice!
-
Thank you Bill ... hope Evolv will help me because Gearbest can`t ......
-
(
I can not throw it in the trash that Dna board....only because it can`t charge ... it doesn`t seems to drains cells different on my li-po ....
I opened VT133 and it is very tight inside than Panzer box.... it has a separate board for 18650 conection ....
-
I tried with 2cell Lipo... nothing... it shows 0.93 A from laptop USB ...and the 3 battery voltage does not increased ....
I figured that near USB on the board is a very hot small area .... only on one side... Lipo was disconected...you have some photos with that area on my board.
1. Do you think that an electrician can repair this board?
2. Can i change this board with another dna200 from a Hcigar Vt133 where i`m charging batteries on an external charger and put there this dna200 wich fails to charge Lipo
? -
It`s a very fast and nothing change.....
-
When i click Soft / Hard reboot it appears a little window with ``Soft / Hard reboot command issued`` ... is it ok?
-
Lithium Polymer selected and 3 cells ....
-
Hello,
I bought my second Panzer Box DNA200 from Gearbest with serial VBNGZARWGKVZ of the DNA board.With this second one i have a problem with the board. It doesn`t charging.
My first Panzer box came with original Lipo but this second one has a Fullymax 1500mah 3S 20C Lipo.
When it arrived, the battery was drained, i tried to charge but nothing. I changed with another Lipo and it doesn`t charge. After that i charged that Lipo on a Lipo charger and is OK now. All my Lipo batteries are OK now.
I connected on Escribe and on my laptop USB it shows 0.95A charging but the voltage it is the same. I changed a lot of USB cable, i tried USB recovery charge .... Still the same.... The 3 battery voltage has not increased.
I can charge my Lipo batteries only with other DNA board or Lipo chargers.
I`m attaching you some photos with the board, Lipo and Escribe device monitor where it shows that is charging 0.95A from a laptop USB (where it should be max 0.5A)
Please help me.
Thank you.
Think Vape Panzer Box
in General Discussion
Posted
Opened ...
Ticket tracking ID: 384-7PA-E21R but still no answer ...