flo_46
-
Posts
17 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by flo_46
-
-
Hey guys,
So ChunckyButt200 had it right at post #29, the wire was soldered to the wrong pin, since I'm no expert, it took me a few tries but I finally got it right !
Thank you big time for the support !
See you around. -
Hey,
So I managed, asking around in my favorite vape shop, to take a peek inside a working C1D2 (if it ever existed ) and I took a picture ChunkyButt200, tell what you think before I start heating up the soldering iron...
so here's mine
and here's my the (working) one I got my hands on, they're a slight difference at the C1-C2 area...
If this changes what you thought I should do, let me know !
Thanks a lot. -
Hey,
i'll try that ! what you're saying makes sense ! it was connected to the up +, and needs to be connected to the down +, I'm recieving a soldering iron in tomorow or the next day... I'll keep you posted ! -
I guess you're right ! it really isn't my area of expertise...
If I could see how a "functionning" C1D2 Vapedroid is wired inside I might solve this issue !
Thanks for the update thought, I'll try and contact VapeDroid for more info. -
-
i'm a little sceptical on cutting the wire...no offense !
i'll wait and see if someone opens up its VapeDroid to see what the wiring should be !!!
thanks ! -
I think the Dna board is underneath the one you see, cause there a 2 boards on my set up
I can see the "up" written on one side and "down" on the other side just like it shows on the dna picture.
Also, when i connect to evolv website via escribe, I have no issue, I don't think it's a clone issue...just a wiring one.
cutting the black wire ? are you sure ????
thanks !!!!!! -
hey, so i took the board off... and it looks like this
it appears the #6 has nowhere to connect to...
Can someone tell me why there's only one wire on this side ?
the black wire is connected on #5 (up +) ? Is it normal there's no wire on #4 (down +) ?
Somebody help !!!! what's wrong with this setup ?
Thanks ! -
I can totally see that giz_60 ! Now my biggest concern is how to get the board out since the wires are on the other sides ! I' no expert ! Like i said ealier i think i have to unscrew (if i find the right tool) the 3 torx screws at gnd and then check the wiring ! Thanks
-
ok, i'll try this.
If I understand correctly, where there's no continuity is where there is a problem, and where it needs welding...
thanks a lot ! -
duly noted,
I'll try to take the board out without breaking it
I have to unscrew the 2 GND and 1 out torx screws to do so... right ? -
-
Thanks dwcraig1, I'll try that this WE !
have a good one ! -
retird said:
Contact the vendor you got it from..... defective wiring or etc....
hey,
I can't, it's second hand, hence my questions !
-
Wayneo said:
Welcome @flo_46
Why don't you return it to your place of purchase for a replacement? BTW, if the 'down' button makes the wattage go 'up', what does pressing the 'up' button do?
hey ! thanks for welcoming me !
The up button goes up also ! i can only go up !
@retird : it says normal i tried switching to swapped and it only goes down now (the 2 buttons )
under the screen tab it says left,
i've tried every combination...either the 2 buttons go up, or the 2 button go down !
what do you think ? -
Hi,
I just bought a Vapedroid C1D2, and the down button is not working properly. the down button, in wattage mode, goes up instead and I can't access the menu for TC and what not...
Using the monitor on Escribe, the "simulate button press" works fine, but on the mod it doesn't, so I guess the board is ok ? am I wrong ?
So my questions are :
Does it come from faulty welding on the dna board ?
Can I repare this myself ? if yes how ? menaning Is it complicated to strip down the mod and fix it ?
i looked at the data sheet, I've seen where the problem might come from (holes 3, 4, 5 or 6 ) but i would apreciate some insight before I go further.
Thanks for your replies
Vapedroid C1D2 Down Button not working !!!
in Report a Bug
Posted
hey,
I think it is 0.5 mm torx. The 1 mm screw driver I tried first was to big.
hope it helps, good luck to you