benpui
-
Posts
9 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by benpui
-
-
giz_60 said:
You will notice in the last screen shot, the wattage starts to drop off when cell #1 is hitting the 3.09 level...setting the cell soft cutoff to 2.8v will help, along with a new set of batteries...keep them married so that they drain & charge together...
-
thanks very much for patience and your help ! i might have damage the battery due to over heating the battery with the wrap. I'll purchase a new set of battery for it.giz_60 said:In the mod tab, set your 'Cell Soft Cutoff' to 2.8v...looks like you either have a weak cell (#1) that is hitting the cutoff, or you have a battery connection issue....might want to try a new set of batteries & keep them married...
-
ok got itgiz_60 said:While firing please...
-
ok got it. i updated escribe to 1.2 SP5giz_60 said:You changed/posted a different screenshot...can you post another with the ONLY the following boxes checked...pack,cell1,cell2,power,power set,cold ohms,live ohms.
-
i tried it . it still showing 3cell @ 1.10v and fire inconsistent voltagegiz_60 said:Device Monitor is showing 3 cells when it is a 2 cell device..in the 'Mod' tab, make sure it is set for 2 cells & upload to device... see if that helps...
-
oh sorry! thought you meant the monitor of the mod.
-
im using an OBS crius plus. here a gif file of the monitor when im firing it. when i switch to another atty , its does the same thing. and also i rewrapped both of my LG hg2 once
-
Hi all, i have a problem with my VT133. im using fully charged pair of LG Hg2. i did the latest firmware upgrade and setup the battery in escribe but when i vape , the voltage is inconsistently going up and down in power mode and wattage goes from 35w down to 24w and up again. i got a dual kanthal coil 28g @ 0.58ohm setup in my atty. am i doing something wrong in escribe?? also when i lower down the wattage to 30w , the voltage is stable. i am confused
hcigar VT133 voltage issue
in Report a Bug
Posted