mrminimal
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by mrminimal
-
-
dedone said:
[QUOTE=Jvape78]Have you plugged into escribe and watched the stats on the monitor panel while this happened? I'm wondering if you are getting good connection on all 3 cells. There have been some units that are having connection problems because the plastic ring is a little high or the batteries are a little old and worn.
unfortunately at home i've only mac, i'll try to have teh same problem whan i'll be at work and i'll check. Anyway thanks for the info i'll try to check the connection.
Thanks for your help!!!!![/QUOTE]
Get Parallels or Virtualbox! Virtualbox is fee.
I personally prefere parallels. Works perfecto! ;-) -
mikepetro said:
Stick it in here. There are 17 Battery Results posted so far, the battery results are on the right hand tab visible at the bottom.
https://goo.gl/b33IPB
Form to enter a Battery Test Result:
https://goo.gl/IP9iSA
Please support this effort!
Ive already done it mate.
The only problem is that you need also a column for the cut off and maybe a option for downloading the cvs files. and I can't change the values if I want to add something Ive forgotten. -
sy5tem said:
arent 1000mah 11.1 battery 11.1 wh ?
should be, but there is always a slight difference what the actual battery capacity is. some lipos write 13000mha but only have 1000mha.
-
Alright, thank you Gmc8538. It just seemed super high. Ive been looking at other mods results and non of them have been that high. ;-)
-
Gmc8538 said:
[QUOTE=mrminimal]I've got the dna 200 boxer.
Here are my results for the case analyzer.
Everything looks fine but 40.59 F/A is the only value I find pretty high.
Maybe someone owning a boxer could tell me more about it. Or anybody who knows more about this value.
Thanks guys!
FYI I have the same mod in the normal nylon plastic (not the alumylon), and the F/A reading on mine is 43.17, so I'm guessing it's normal for these boxer DNA 200's.
Anyway the readings on mine...
Case cooling time constant: 506.61 s
Case Heating Time Constant: 653.69 s
Case USB charge Temperature Rise: 13.65 F
43.17 F/A
Minimum Ambient Temperature: -20 F
Maximum Ambient Temperature: 110 F[/QUOTE] -
I've got the dna 200 boxer.
Here are my results for the case analyzer.
Everything looks fine but 40.59 F/A is the only value I find pretty high.
Maybe someone owning a boxer could tell me more about it. Or anybody who knows more about this value.
Thanks guys! -
Here we go guys! Finally the discharge graph for the boxer dna200 with the zippy compact 1000mAh 3s 11.1V 25/35 burst lipo pack.
hope your Boxers battery display will work correctly.
;-)
and in the field capacity you have to enter 9.66 wH -
Thanks, since I haven't found anyone who is willing to share, I had to do it myself.
I am gong to pst it now. -
kevin_b said:
I spent about an hour trying to figure this out today as I see Phil's video and wanted to change the increment scrolling to a whole number instead of 0.1 increments.
Someone posted a question in the comments on the youtube video, Phil got the software directly from evolv so its not quite released yet, he hoped it would be released in time for that video so hopefully the will release it soon.
The current latest release is 1.032 i think.
Man! Thanks for the info! I was going nuts! :-) just like you Ive spend hours trying to find out way the hell escribe isn't autoupdating software and firmware. Then I searched the forum, but NOTHING. I even wrote to evolve, but they didnt answer jet.
Ive been thinking about that Phil might have had it directly from evolv, but then I went on ecigstats and saw that a very small percentage of users are using already the dna200 firmware update 2015/09/30. so I thought something is wrong with my setup. I guess they must be some people like Mr Phil Busardo.
Well, thanks for the relieve. ;-) -
Hi, has someone else got problems with autoupdating escribe to version 1.0.34 and the dna 200 firmware 2015/09/30? Also I cant finde those updates on evolvs homepage either. I am sure they exist because in Mr. Phil Busardo tutorial they exist.
-
Hi, has someone else got problems with autoupdating escribe to version 1.0.34 and the dna 200 firmware 2015/09/30? Also I cant finde those updates on evolvs homepage either. I am sure they exist because in Mr. Phil Busardo tutorial they exist.
-
Does anyone have the discharge profile for the Dan 200 boxer mod? It curies the zippy compact 1000 mAh 3s 11.1v 25/35 burst lipo pack. I've googled for it and asked on FB, but haven't found a discharge graph yet. I unfortunately can't do it because I don't own a resistor. Now I'm hoping to fine help here. Wish you all a wonderful vape!
-
Hi guys!
Has anyone yet made the battery analyzer test for the BOXER MOD DNA200 with the zippy lipo?
If yes I´d be interested what the results are.
Thanks in advance and enjoy the awesome DNA200
Csv. Discharge Profile For Boxer Mod
in Batteries and Charging
Posted
I am the one one who made the profile for the zippy compact 1000mha.
forgotten to enter the ohms and watts.
ohms are 0.25 at 40 watts. cutoff 3.10v
Maybe you can't somehow upload the csv file as well.
Zippy_Compact_1000mAh.csv.zip