[VTBOX 200 USB Charge show 3.08A]

48 minutes ago, zark said:

Во первых проверьте настройки EScribe, какой тип батареи выбран в программе. По опыту использования устройств с LiPo могу сказать, что подобная проблема возникает при резком снижении внутреннего сопротивления LiPo ячейки, при этом очень часто разрушается чип, который отвечает за ограничение тока зарядки. При повышенном токе заряда LiPo ячейка начинает разрушаться ещё быстрее. По этому при проверке работы платы другой батареей будьте осторожны, чтобы не испортить аккумулятор.

so if i replace the battery,the problem will solved?
or my board already broken?

[VTBOX 200 USB Charge show 3.08A]

I'll try with another battery later and if its still show 3.08A then the problem is the board  

[VTBOX 200 USB Charge show 3.08A]

2 minutes ago, dwcraig1 said:

Did this happen as soon as you tried it after cleaning the switch, or did it take awhile to develop?

its happen as soon as i cleaned the firing button.

[VTBOX 200 USB Charge show 3.08A]

2 minutes ago, dwcraig1 said:

Being that the battery appears to have been sitting well below 2.8 volts (providing that volt reading is accurate) the battery surely has internal damage. With that being said I would think that the board is what's causing the problem. But I don't know for sure. 

should i request a replacement to vapecige?
i hear they have a lifetime warranty  

[VTBOX 200 USB Charge show 3.08A]

Just now, dwcraig1 said:

Does the mod function or throw a battery error?

The lipo now is undervolt,when i switch to power supply mode,it has check battery warning.
should i replace the battery?

[VTBOX 200 USB Charge show 3.08A]

Just now, dwcraig1 said:

First off I can't imagine a computer USB putting out that much power. Do you have a volt meter where you can measure the actual voltage of the battery?

 

 

Yea,no matter what i used to charge this mod,its always show 3.07 - 3.08 A
im curious,its my lipo or the chip broken?

[VTBOX 200 USB Charge show 3.08A]

Pls heeeelp..

[VTBOX 200 USB Charge show 3.08A]

Hey guys,

After me cleaned the firing button of this mod and charge via usb,its always shows 3.08A.

The LiPo went undervolt after that,is my chip are broken?

Ps. Sorry for my bad english

[not charge]

Any resolve?

My vtbox200 have the same problem,always charge at 3.08A after me cleaned the firing button.