Reezco
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Reezco
-
-
-
Hi retird,thanks The heat is on rda and the mod at battery area,and when im firing i put my finger to the battery cover and it is hot,after 5-8 firing all body getting hot.i will try to to clean the battery cover threads,retird said:So is it that the device gets hot at the battery area? Previous Hcigar VT75's had a cathode screw that when not tight would cause the case and battery to heat. The nano doesn't have the cathode screw but some report the device heating of the case and battery on the nano also. Some say cleaning the battery cap and threads of the device where the cap screws into helps with unwanted heating at the battery area. Some atty's get hot with use. Don't know if this is what you are seeing but just passing along some info....
Good luck... -
Hi chunkybutt200,thanks for reply,sorry for wrong type your name,does this issues really from my batteries or have something wrong with my mod or i did a wrong mode set up,and my coil etc?bacause when i pull out the batteries,they are not too hot as the rda and the mod.it just warm. Im sorry for my bad english,haha
-
Hi chuckybutt,i'm newbie have same issue with my vt75nano,it hot quickly after 5-8 puff,i use khantal A1 24 ga,6 wraps dual coils on tsunami rda,running in 55 watt,.40ohm,i use awt 3000mah 40A,and mxjo 3000mah 35A batteries,and it same very hot.so should i buy a new battery?
Wattage issue??
in General Discussion
Posted
May be i got same problem
i run 75 watt after hitting the wattage drop to 32W,after a less than second its back to 75,what is the problem guys?
i run with therion 166
fused clapton 2x28/36g 0.19ohm