liv3wired
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by liv3wired
-
-
went ahead and soldered up battery sled the board does still work so umm yeah I'll shelve it and come back to it later
-
Ok peeps tried locking and locking stealth mode in and that is not the case
It was in another mod I had built working flawless 1590 A+. I took it out was in the process of building it in a G+ with dual 18650 sled. Got it all soldered up mounted to my board holder decided to hookup to escribe to switch to 2cell and thats when I noticed the screen had stopped working.
I'm going to finish the build except for epoxy and see where I am at at that point.
I have emailed Evolv about a replacement screen or eta on screens. At this point I may just sell what I've got and call it a day!?
Thanx everyone for the help and suggestions. -
Can stealth mode be changed via escribe? The ribbon has no kinks or cuts in it.
-
Board functions and escribe reads it so yeah screen is dead
I suppose there are none to be had? -
I can't remember but does the screen come on with just USB and no battery attached? Was using it in another box with a lipo. Switched boxes, board holder and was about to solder up dual 18650 sled decided to hookup to escribe first to change to 2 cell and the screen doesn't come on. Escribe reads, uploads and downloads fine?
Please help I am so frustrated I want to throw the whole thing in the trash! -
Thank you Megaton/VapingBad. I think I must have played with the curves at one time. After I did a reset to default on the device battery is charging full and the wake/sleep mode isn't acting up.
-
Ok I'll keep that in mind. I do have a Dark Horse RDA I could test with. Also I went into Escribe and did a master reset to default settings. Gonna leave them at that for testing. The battery was at 98% before I did this and after it was at 90% and charging.
-
I use Kanger Subtanks so I'll try switching through them and see if it does it on all tanks.
Thank you for your help! -
No I have not changed the ohm lock range it's still set at default. If it was issues with the 510 would I not have issues under normal use?
As for the battery thanx for the info I can deal with it. -
Every time when my device goes to sleep (like maybe 30 minutes) and I hit the fire button it comes back on like first powering up displaying splash screens and asking me if new coil or not. Is this normal or is there a setting somewhere I'm missing?
Also battery has never reached 100% only 98% even after 24 hour charging? Running Fullymaxx 900mah.
Other than those 2 things the device works flawlessly. Hardest hitting mod I have! Love it -
That would be a Mamu faceplate http://www.shapeways.com/designer/mamu
Dead Screen
in General Discussion
Posted
Appreciate it. I've already been in contact with Evolv and they're going to RMA it for me