randomwindstorm

Well that's good then. I was terrified I might have somehow fried something essential on the board. It's still climbing albeit slow as a snail haha. It's at 4.02V now. Thanks for the help guys, I'll let you know how this turns out.

So I'm gonna start off by describing the situation. My screen gave out on my mod because the connector got pinched underneath the firing button, so I took it apart and got a new screen. In the 4 to 5 days my mod was out I had it open with the board power connector unplugged but I accidentally left the balance board connector plugged in to the 3S lipo battery. By the time my screen came in and I got it installed and working the battery had drained down to about 10%. The device monitor now shows the charging current anywhere between 0.001A and 0.080A when it should be about 0.5A on my pc usb connection. I've been running a recovery charge with little help for about 12 hours now. Two of the cells are at 4.2 and the third cell went from ~3.9V to 4V as of now. Is there any way to troubleshoot what the problem could be?