lugh23
-
Posts
13 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by lugh23
-
-
Hi I made a custom build mod with a small screened Evolv DNA 200 chip. I also have a couple of Wismec RX 200's and upgraded them to 250watt so am wondering can I do the same and upgrade my DNA? I'm quite happy with 200watts but just curious if it can be done and how. Cheers, Terry
-
The plan is to use very rare wood which I have but am not going to jump in the deep end so will start with a premade casing just to get a feel for it. Ideally I'd like just to use the middle part of the metal casing cutting off the wall and gluing one piece of this wood as one wall and using the other piece of wood as the lid but think I'll walk before I run
-
Ps Blacklace you've got some beautiful mods there fair play
-
Ya he mentioned a gasket so must be tween the casing and the door. I wish I could eyeball all the stuff rather than looking at measurements and diagrams I've drawn on a4 pages
There's a nice casing here inside.. 99mm width 48mm height 22mm that the above battery and dna chip would fit perfectly and on the site it says that battery is okay http://www.stealthvape.co.uk/electronic-cigarette-mod-parts/2xaa-3xaa-14500-18650-battery-boxes/NLS-G3-PLAIN-MILLED-DNA200-2 Going to order tomorrow so trying to get everything measured and okayed.. -
Another guy suggested this? http://www.hobbyking.com/hobbyking/store/__11903__Turnigy_nano_tech_1300mah_3S_25_50C_Lipo_Pack.html which would fit perfectly into the casing I am thinking of getting, is it okay? He also sent me a pic of a 1500mah in his mod though the casings height is 22mm and the exact same battery I checked was 28mm so dunno how it fitted.
-
I've decided on a HCigar VT200 Replacement 1300mAh Li-Po Battery Pack with dimensions Depth 19mm Height 67mm and width 29mm and trying to order the right casing/enclosure. Just wondering what is the depth and width of the DNA200 chip in a mount like the one here? http://www.stealthvape.co.uk/image/data/Acrylic%20Parts/DNA200%20Holder/dna200-screen-holder-screen%20slice-midframe.jpg
-
-
" for the price of one, even better thanks
-
Would the Hcigar VT200 LiPo battery v2 be okay? The Dimensions: 68mm*30mm*20mm look good for building though it's 25e over here so a bit pricey though I guess I could order and have it within 2 days.
-
I have around 4 mech mod's and 6 RDA's so am looking to build a temp control regulated mod for mainly rta's
-
Want to make the build as tight as possible so 60cm in width is max like the http://www.modmaker.co.uk/Mod-Making-Supplies/Enclosures/ModMakerBox-WideBoy-Natural-Aluminium would be the biggest I'd build. (PS not spamming this site, just one that a friend recommended as live in Ireland). I'm going to try to use the slimmest wire recommended by Evolv as want a tight ship so to speak. The length isn't as important as the width. If you have any links to the cheapest 1500mah LIPO batteries that would fit in 60cm by 24cm including chip I'd greatly appreciate it. Sorry about all the questions but as in Ireland there's no shops you can go in and eyeball the parts. I have to use the net and forums and buy and then wait a couple of weeks before it arrives and then see if all bits fit!!
-
Hi, I'm just about to build(try) my first mod using a dna200 chip. I was going to use two 18650 batteries but decided to try and get the full 200 watts by putting in a triple LIPO battery. I saw on a video tutorial that the recommended 900mah only lasts 3 hours so am wondering what is the highest LIPO mah battery I can put in the mod giving it a longer battery life?
Can you upgrade the DNA 200 chip to 250watt using Escribe?
in EScribe, Software and Firmware
Posted
I figured not. I try to keep my wattage down around 30-60 so am very happy with 200watts. Thanks for the reply matey