redwolfe90
-
Posts
28 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Posts posted by redwolfe90
-
-
They usually get answered within 36 hours.
-
I actually just checked mine due to the odd feedback I was getting from the fire switch and the ribbon cable was indeed pinched between the actuator and the button. I disconnected the battery completely and unscrewed the board from the body. Carefully lifting the board toward the 510 i used a toothpick to carefully bend the ribbon cable to the bottom while lowering the board back into place. Before screwing it back down I checked the feedback on the fire button again to see if it changed. If not I tried again till I got it. Just make sure to be careful so not to snap the ribbon cable.
-
I am, maybe it had something to do with MY curve, I swapped both back to the default curve in Escribe and now they been lasting MUCH longer than before. Usually after 5-6 hrs my Hana is down to 50% and I just checked it a half hour ago, it was at 65%.
-
I checked my settings, the Hana was set to 10.54 and my 3d printed mod was set to 14 since that's what is on the pack.
-
I have a Hana Modz 200 and I have one I made myself. The hana has a 950 nano-tech turnigy and my mod has a great planes 1200mah.
-
I've been playing with the DNA200 and Escribe for a few days together and I was wondering why but whenever the screen shows the battery at 42-44% I get a few more vapes out of it and then it shows "Weak Battery" I let it sit for 10-15 minutes and go back to vape it and it'll show 0%. Why is the such a large gap when showing 0-44% but it won't show anything in between? Could I possibly have the discharge curve set improperly?
-
Upload this curve into the battery discharge curve. Note that the curve is for lg he2 cells. http://evolvapor.forumchitchat.com/file?id=2391339
-
1
-
-
My own 3d printed design, next to a Hana 200. Measures 105mm x 50 x 24, just 5mm taller than a 1590G box. Would really love to get this made in aluminum. Got a 1200mah lipo pack inside, one could put a smaller cell inside to make room for connectors (XT30, etc) for easy battery swapping. As it is now, there's no wiggle room at all.
-
Everyone is waiting on beta cases
earlier in this thread it was stated that all parts used in the beta will be for sale in the future. -
Did you check each individual cell had a charge on it with a multimeter?
-
I attempted swapping the blown fuse from the board to The other but I unfortunately lost the good fuse during the swapping. I will have to send in both boards to be repaired.
-
I'll give swapping the fuse a shot, I just have to get out my telescope
-
No this is a different one.
-
Probably 15 minutes max. I just got the boards and made the mod yesterday.
-
Yes it is actually.
-
With USB plugged in it reads 1.2V
-
Core voltage is reading 0.15V
-
Battery reads 8.15v at the discharge wires and each battery reads 2.68, 2.78, 2.82
-
Here's the bandgap reading
What I mean by popped the fire button, i think I arced it against the case by accident when I was assembling with the first board.
I also noticed in the device manager, that the battery pack was discharging at an odd rate as it was connected. -
The firmware was uploaded yesterday night. Warranty showed up this evening. I have no clue what firmware was on it before because I did the update as soon as I finished building the mod.
-
I was uploading some profiles to my DNA200 board and shortly after I was vaping on it for less than 30 seconds when I started to hear an odd ticking noise. I unplugged the USB and atty, and then I tried starting up the board with the fire button, but kept getting the startup screen on the board. Once I plugged it back into USB, it started up to the second logo screen, and then showed "Warranty" I took a quick video with my phone showing what happens. I did upload the 07-09-2015 firmware to this board.
I am a little frustrated since I was able to use it no less than 24 hours. I also somehow managed to pop the fuse and the fire button on my first board yesterday while I was assembling the test mod.
[video]https://www.youtube.com/watch?v=vkaCDfVfAnk[/video] -
Last night I bought an E-flite 30C 800 mah 3s pack with 18awg output wires. A little better so I won't have to open up the pack. I've also been trying to find the fully max cell used in the reference mod but no luck so far. Anyone have a link to it?
-
Thanks everyone, I think for the time being I'll just use the cells as is and when I get new ones with higher gauge output wires I'll swap them out. I've worked with Lipo packs in the past but id rather not go through the trouble.
-
Thanks John No I don't plan on Vaping anywhere close to 200 but maybe as high as 70. I'm also making one for someone else and he Vapes much higher than I do though we'll see what he thinks first.
Suggestion: Finer Temperature Adjustments
in EScribe, Software and Firmware
Posted
I personally can't wait until the reference case kits are ready to buy. I've wanted one since I first saw a photo.