[VT75Nano Ohm Resistance]

retird said:

Do you mean the ohm's reading shown on the device changes as you vape and then changes back as the coil cools?  It is reading live ohm's which is normal.  A large variance may mean a loose or poor coil connection, poor connection at the atty connector, or a wiring issue in the device such as a poor ground. The screenshot you posted look pretty good as far as the cold and live ohms being vaped in Power Mode.....

I know it is normal as the coil cool down, but my ohm reading is not normal at all, going to large variance reading and its getting high starting from 0.87 to 1.21 and 1.34. If there poor connection with my coil it is impossible because when i try on my other mod (vt40), the ohm reading is normal. I bet it is poor connection with my atty connector or wiring issue. how can i fix this? Can i fix it by myself or i need someone that are professional to handle this?

[VT75Nano Ohm Resistance]

My battery cover also has been tighten. I worried if i tight it too much, my battery cover will stuck and cannot open.???

giz_60 said:

Make sure your battery cover is on good & tight...the device gets ground through the body via the cover...

[VT75Nano Ohm Resistance]

Still the same result bro. And i opened my mod twice to make sure there's no untighted screw.

giz_60 said:

try a spaced coil

[VT75Nano Ohm Resistance]

I dont know im using the tc mode or not, im gonna check it again later. I tried on atomizer analyzer and other mod, no jumpy ohm, but when i put any tank(doggystyle, hurricane jr and kayfun v5) on my vt75nano, all show the jumpy ohm. The worse ohm jump is from 0.89 to 1.21. And its getting high to 1.38.

Wayneo said:

Yo @Amirulmukmiinin Are you trying to use this in TC mode ? If it's just jumpy ohms, check the build with Atomizer Analyzer.

[VT75Nano Ohm Resistance]

contact coil. i tighten the plate already so that mean no need to tight it too much? what does it by adjusting it up or down? sorry im not understand.

[VT75Nano Ohm Resistance]

nah after a minute my ohm still running bro. tighten all the screw but still having the same problem.

[VT75Nano Ohm Resistance]

done it! thank you so much bro! really appreciate it

[VT75Nano Ohm Resistance]

kanthal 28, 6wrap, 2.0
using doggystyle tank      

[VT75Nano Ohm Resistance]

Hi i have a problem with my Vt75 nano about ohm resistance.
my ohm is not set in every puff.
every puff mean different ohm reading. Anyone can help?

sorry for my broken english, i wish all of u can understand. Thanks

[Therion 133 DNA200 empty battery bar display]

if other country how can i reach them? 

[Therion 133 DNA200 empty battery bar display]

this on device monitor

[Therion 133 DNA200 empty battery bar display]

this is the printscreen of my battery setting. when i use this setting (lithium polymer) , my mod cannot fire and show 'check battery'.

and my battery display still empty

[Therion 133 DNA200 empty battery bar display]

Hi guys, im having a problem with battery display in my Therion 133 DNA200,

i already reset to default, reset all the statistic and so on but it still show my battery is empty. Tried to change the wH and do all the things that i found in this general discussion like change the wh to 24.42, its work but not long, after 1 minute, it will leave my battery display back to empty.

I also try to ask my friend that using therion, they said i need to change the battery type from power supply to lithium polymer but i cant fire and show check battery at my display panel. help me guys. thanks

im sorry for my broken english but i try my best to make sure u guys can understand what im try to discuss here. below i attach my ecig file, please help me. thankyou guys

Therion 133 dna200.ecig