[Hcigar VT250S Case/Thermal Settings]

On 7/20/2018 at 5:55 PM, Wayneo said:

All you need is a stable temperature and your batteries 25-50% full. 

No atty required to be attached.

Oh, and a couple hours ~2-3 max.

Great, Batteries where between 25-50% and I left it whilst I did other things but it was definitely at least 2hrs and no more than 3hrs when I went back to check and it was as you said (Start, accept, upload). I did notice the info on screen but I didn't really understand it tbh but I have 3 other dna mods 1x DNA75 and 2x DNA200 which I just copied the settings from other users, I was thinking of running the analyzer on those but Is there any need to do this or are other users settings generally correct for everyone? Thanks again for your help.

[Hcigar VT250S Case/Thermal Settings]

Thanks for everyone's help I finally managed to run the analyzer the batteries just wouldn't run down, I hope this helps someone else.

 

 

[Hcigar VT250S Case/Thermal Settings]

2 minutes ago, Wayneo said:

All you need is a stable temperature and your batteries 25-50% full. 

No atty required to be attached.

Oh, and a couple hours ~2-3 max.

Thanks mate I didn't realise it was that easy, I'll give it a go and post back the results to save anyone else the time, Thanks again.

[Hcigar VT250S Case/Thermal Settings]

I thought some kind of attachment was needed thats fits on top of the mod to run the tests? I've just been looking around and seen people making them from a RDA is it as easy as it looks? just run 4 lengths of kanthal and run the test? thanks for the reply.

[Hcigar VT250S Case/Thermal Settings]

Hi, If possible can someone please post their case thermal settings for the VT250S I've looked everywhere and can't find anything and I don't have the tools to test it with case analyzer. Any help is appreciated. Thanks.