Lpearce7

I've been using the 28.51Wh. It has worked well for me. With 3 battery mods I never get a low battery warning. I usually just put my soft cut off at 3V and swap them out when it gets down to the low 30% range. On my dual 18650 mods, I'll go 2.8V or so.

Posted the previous post too soon. These are the 5 I have for 2x Sony VTC6. I can't remember which one worked. But one will. I'm using it on a couple right now. 2x Sony VTC6 Discharge Curve.csv 2x Sony VTC6 (excel).xlsx

Here 2x Sony VTC6 (Excel wkbk).xlsx 2x Sony VTC6 (CSV MS-DOS).csv 2x Sony VTC6 (CSV MS-DOS).csv

Attached are 2 different csv's for 3x Samsung 30Q. The correct Wh is listed in the file name. 3x Samsung 30Q 26.87Wh (v2).csv 3x Samsung 30Q 28,510Wh.csv

Thanks for the 30Q profile!!

I would also like to get the csv. for the Sony VTC5A (both dual and triple 18650) Anyone have this or the VTC6 in triple 18650???

Thanks!

Thanks. I've been reading threads on the forum for a while now. Finally have a question that I couldn't find an answer for. I actually do need the curve for the dual 18650 Sony VTC6. I have the VaporShark DNA133, VaporShark Vapor Flask DNA133 and Boxer Classic DNA 167 that are all using the VTC6. I would greatly appreciate that csv when you get a chance. Thanks for the help!

If this information is posted in another thread, please let me know. I wasn't able to find the .csv Discharge Profile for the following batteries: Sony VTC6 Samsung 30Q (I have the triple 18650 .csv, but not the dual) I'm new to the battery analyzer, but have been using escribe for about a year now. I have several DNA250 & 200 mods with both 2 & 3 18650s. So I've been trying to get the most accurate battery reading for each and have only been able to find the .csv for the (3 18650) LG HG2 3000mAh, (2 18650) LG HG2 3000mAH and (3 18650) Samsung 30Q 3000mAh. Right now I'm only really using the VTC6 and 30Q. I don't really want to run the battery analyzer and was hoping someone has one this already. Also, what should the nominal pack voltage be? I've read conflicting opinions. Most say 3.7 x # of cells and some say 3.6. On all the datasheets, it says 3.6v. Last question, for 18650 mods, what is the recommended soft cell cutoff. Most of my mods came with 3.09 or 2.9. Thanks for any help!