Dampie
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Dampie
-
-
-
@Liquid Dave Red foil for the display
-
if it is including buttons and a evolv based 510, and can be sent to Europe, then 2x.
-
30Q are super batteries, use them for months on high and low watage.
Samsung 30Q vs LG HG2 entity practically the same.
interesting link to post one look to Results Dropbox - samsung 30q vs lg hg2 pulsed shootout test results.bmp
https://www.e-cigarette-forum.com/forum/threads/samsung-30q-vs-lg-hg2-pulsed-discharge-shootout-results.681442/
-
post 12
https://forum.evolvapor.com/topic/66142-topic/ -
i test the file ,100% the battery discharge curve.
try to upload settings to my device no go , with my battery curve a go.
this is my error
-
try last firmware and Escribe .
https://www.dimensionengineering.com/software/SetupES_2015-10-21.exe -
Super Application Thanks Mikla
-
virus scanner ? at home and at work the same scanner? .
some scaners close unknown extensions to open.
file is good no problem here on a W10
sorry for my bad English
-
solved !!!!!!!! .
Cause = laptop close connected with USB cable = display always on.
Solution = USB cord to connect again, and laptop startup = resolved and display go out again.
apparently it gets a charge start pulse or something, which is disturbed, when laptop closed connected with USB cable.
my own stupid fault so
-
@ lewisss thank you for your response , but that's was not my problem , problem was that the display will remain on the loading screen , while he was not plugged in to the USB.
I think it is resolved now , but before I finish this thread , I still wanted to explore what things . a soft reset solved it , strange thing is that I had done it 100 times now ?
. a hard reset did not work ?. -
@ Blueridge dog thank you for your response
, sadly I have already checked you tips, but to be sure, once checked, it remains strangely out of nowhere will the screen no more out . thanks for your complements for the millwork 
-
hello I am since four weeks in possession of a DNA200 chip I've put in a homemade mod.worked flawlessly since day one, and has no problems with it.
'm very satisfied with it best regulated mod I've had so far or have used.
but since today is a strange thing that I can not solve my mod will not power down or go to sleep?.
he remains on the screen of charging
what he is not doing ?.
I tried resetting , new firmware old firmware but nothing helps.
connected with USB, charging it and the chip reads well.
my question now is, what can the USB plug do that he gets a signal that he think he is loading ?. because I think it's the USB plug.
I can only pull the lipo to power down.
hope someone can help me because I can not live without my mod. p.s sorry for my bad english. -
-
what he is not doing ?.
Themes HELP
in Themes and Custom Screens
Posted