Scarab
-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Scarab
-
-
On your video battery meter shows "empty" so what are you waiting for when you press Fire on mod with empty batteries? I also noticed no charging icon when you plug in USB cable. Show us screen from Device monitor, please.
-
More helpful in this situation will be screen from Device Monitor. Are you install new PCB in your mod?
-
All ok already For me INTL version download after huuuge timeout. But i download it. Thanks!
-
INTL version not downloading (w/o any error messages).
-
On screens Capacity set at 11.1Wh. Seriously?
-
I think we never see any new noticeable "features for customization" on old screens. Next step DNA200/250 Color
-
New big software update will be released with new DNA-75C when it come to market, i think.
-
Yep. DNA200 can't balance your battery. Can it vape or show "Imbalanced Battery"? If it can - discharge battery and try to charge it again.
-
Check display brightness in "charging mode". If you see warning "Brightness is too low" your display just off after timeout and you see nothing.
-
kaide23 said:
After a puff, it show up Weak Battery.
VT75 have a little issue in construction, try this. -
kinkmangc said:
Thinking of disassembling and bending it back.
Yes, disassembling and bending a bit it back must work. I saw the same solution for this trouble. -
Are you sure, you installed right EScribe version? (1.0.56)
-
-
relink2013 said:
19.93mm deep MAX
^^^^ this is very inconvenient size. Most of batteries have 20-22mm -
I don't think so. Look at Wismec DNA200 mod. It's 2500-3000mah depending on batteries.
-
Only 75W mod with 2x18650 looks little strange compare to 133W mod (on DNA200). DNA200 mod have more power with same size.
-
"Temperature dominant" checked? And it's only for TC profiles.
-
USB cable problem?
-
What about factory settings? EScribe show "0" in mod resistance?
-
At 1A actually.
-
If your battery drop at too low voltage (like 2V per cell) DNA200 don't charge it in normal mode. So, you need check it in EScribe and run "USB Recovery" procedure to restore battery.
-
It's (Research tab) calculate and limit overall Fire time. For therapy purpose for example.
-
Yep "USB recovery charge" should help. Board not charge batteries below 2V in standard mode.
-
Feature like this (separate screen settings for TK and VW profiles) was in first build EScribe75, if i remember correctly. It would be good for each profile, I agree!
EScribe Suite 2.0 (for DNA 75 Color)
in EScribe, Software and Firmware
Posted
Well, i have a little idea. What if sometime we will have something like "Mod Emulator" - software for testing themes w/o loading it to the mod.
For making test of UI logic and navigation.
Something like this: