-
Posts
218 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Posts posted by Nick
-
-
DNA Go compatible EScribe versions can be found here;
https://forum.evolvapor.com/topic/66731-early-firmware-and-escribe-suite- 1
- 2
-
Can you save your settings file via EScribe using File > Save As and attach it here?
-
If you can put a ticket in here we would like to take a look at the device. If you can also send that tank with it that would be great but if not we understand.
-
Edit for clarity: This is getting away from the original topic of information useful to the general public and would be better resolved via email or PM.
- 1
- 1
-
These coils are compatible with anything the TFV8 Baby Beast coils are. This was really disappointing, I had high hopes for these as they were all listed as SS316 but that doesn't seem to be the case.
Coil: 0.4ohm ProC1 Coil
Material: SS316 (?)
Replay Compatible: No, Dubious
While these coils are listed as being SS316 I am not seeing behavior consistent with that. The resistance only went from 0.366 to 0.386 during a puff at the wattage limit of the coil. I did manage to get it to lock in using Dubious mode but it wasn't the best Replay vape I have had.
Coil: 0.2ohm ProC3 Coil
Material: SS316 (?)
Replay Compatible: No
Not enough rise to even lock in on Dubious mode. Definitely not SS316.
Coil: 0.15ohm ProC4 Coil
Material: SS316 (?)
Replay Compatible: No
Once again no rise. Not SS316.
-
On 4/27/2018 at 2:13 PM, DMAN said:
I should have read this before starting another thread!
I couldn't get my Vapeston 0.15 mesh coils to work, and they are advertised as being SS.
I had my doubts, as Freemax and Vapeston are almost identical (2 brothers I believe) and the Freemax mesh are Kanthal.
Glad to hear the 0.12SS coils work. I'll grab some of them.
What is the resistance at the start and end of a puff? That will at least give you an idea of what they are.
-
This tank is ONLY viable if using the SS316L Mesh Fireluke coils. I however like these coils better in the UForce than the Freemax tank.
Coil: 0.12ohm Coil
Material: SS316L Mesh
Replay Compatible: Yes
Coil: 0.4ohm
Material: Unknown
Replay Compatible: No
Coil: 0.23ohm
Material: Unknown
Replay Compatible: No
-
Huzzah! Freemax has done a SS316L Mesh Coil and it is awesome in Replay!
Coil: 0.12ohm Coil
Material: SS316L Mesh
Replay Compatible: Yes!
Note: These coils also work in the Voopoo UForce tank.
- 2
-
47 minutes ago, clivy said:
I got a paranormal today and tried the 316 cCell ceramic coils and they do work on replay so question answered
Great! Post up a thread if you would like.
-
On 4/21/2018 at 8:38 PM, clivy said:
I would like to know about the vaporesso cCell ceramic type coils, a lot of them do come with 316 wire but most temp control hates them
If they are indeed stainless they should work. I will add these to the list for our next purchase thanks!
-
On 4/21/2018 at 8:08 AM, DutchDK said:
Would like to see the cthulhu Mesh RDA, with 304 and 316L mesh tested.
I have another mesh RDA here and I can confirm that it works with SS mesh so it should work on the cthulhu as well.
-
Coil: 0.15ohm X6 Coil
Material: Unknown
Replay Compatible: No
Coil: 0.12ohm T10 Coil
Material: Unknown
Replay Compatible: No
Coil: 0.4ohm Q4 Coil
Material: Unknown
Replay Compatible: No
-
I know this tank has a ton of compatible coils, so I'm going to need everyone's help here. I know people love these and a lot of people use them.
Coil: 0.35ohm Notch Coil
Material: SS316L
Replay Compatible: Yes
Coil: 0.2ohm
Material: Kanthal
Replay Compatible: No
Coil: 0.5ohm
Material: Kanthal
Replay Compatible: No
Coil: 0.2ohm Nickel Coils
Material: Ni200
Replay Compatible: Yes
-
Coil: 0.1ohm 24 Coil
Material: Unknown
Replay Compatibility: No
Coil: 0.3ohm 12 Coil
Material: Unknown
Replay Compatibility: No
-
Coil: 1.6ohm
Material: Unknown
Replay Compatible: No
-
Coil: 1.5ohm
Material: Unknown
Replay Compatible: No
Coil: 0.5ohm
Material: SS316L
Replay Compatible: Yes
-
Coil: 0.5ohm
Material: Kanthal
Replay Compatible: Yes
The coils say Kanthal but it locked in and worked well in Viable mode surprisingly.
-
Coil: 0.4ohm GTM-2 Coil
Material: Unknown
Replay Compatible: No, Dubious
Locks in with "Allow dubious coils." but I experienced a dry hit when the atomizer was cold. Not suggested.
-
Coil: 1.6ohm
Material: Kanthal
Replay Compatible: No
Coil: 0.8ohm
Material: Kanthal
Replay Compatible: No
-
Coil: 0.15ohm
Material: Unknown
Replay Compatible: Dubious
Required "Allow dubious coils." mode but did work. This tank also accepts the Smok TFV8 style coils.
-
Coil: 0.15ohm Q4 Coil
Material: Unknown
Replay Compatibility: None
Coil: 0.12ohm T12 Coil
Material: Unknown
Replay Compatibility: None
-
Coil: 0.1ohm
Material: Suspected Kanthal or Nichrome
Replay Compatible: No
Only one flat disc coil available for this tank. I threw as much power at it as I could without burning it and the resistance didn't budge. This would be an excellent tank with a SS disc, hopefully they make one.
-
Coil: 0.25ohm Notch Coil
Material: SS316L
Replay Compatible: Yes
Coil: 0.5ohm Coil
Material: Unknown
Replay Compatible: No, Dubious
Works well enough to enable Replay with "Allow dubious coils." but my experience was not great, but yours may differ.
-
Coil: 0.5ohm Coil
Material: Suspected SS316L
Replay Compatible: Yes
Coil: 0.25ohm Coil
Material: Unknown
Replay Compatible: No
dna go
in General Discussion
Posted
1. It can be, however the DNA Go is not necessarily intended for use with replaceable batteries as there is no reverse polarity protection. Extra care must be taken if doing so.
2. Yes, it is a wattage controlled board.