Jump to content

Any way to do a 1W Preheat for a duration before engaging Replay profile?


Recommended Posts

Hello!  I've been using DNA chipped mods for traditional Nic vaping for a very long time.  The last couple years I've also been using them for sub-ohming cannabinoid distillates as well.  The DNA chip in Replay mode does an admirable job protecting the coil from running dry even when vaping near solids (at room temp).  Even so, when colder winter environments are involved, it's a lot to ask of the device.  Is there any settings I can manipulate to get a "Lower than set wattage" preheat to bring my oil up to temp (and viscosity down) before it ramps up to vaping wattage?

 

The best I've been able to manage is to just create a completely separate "Low wattage profile" just for doing this, then switch back to my replay profile, but that's a lot of fumbling around on the menu each time.  Thanks for letting me pick your brains!

Edited by EatingPattern
Link to comment
Share on other sites

vor 8 Stunden schrieb EatingPattern:

The best I've been able to manage is to just create a completely separate "Low wattage profile" just for doing this, then switch back to my replay profile, but that's a lot of fumbling around on the menu each time.

Hi, in my themes ("2 in 1" and "Basic"), AFTER saving a puff in REPLAY mode, you can adjust the performance downwards at any time without losing the saved move. After you have brought your liquid up to temperature, you increase the performance again above the previously saved limit and leave the control to REPLAY again. During this process (in my theme) REPLAY is not deactivated; So do not "Cancel" and reduce the power, but in REPLAY mode reduce the power - temporarily - manually.

Link to comment
Share on other sites

Am 22.10.2021 um 01:08 schrieb CMK aka gwyar:

Hi, in my themes ("2 in 1" and "Basic"), AFTER saving a puff in REPLAY mode, you can adjust the performance downwards at any time without losing the saved move. After you have brought your liquid up to temperature, you increase the performance again above the previously saved limit and leave the control to REPLAY again. During this process (in my theme) REPLAY is not deactivated; So do not "Cancel" and reduce the power, but in REPLAY mode reduce the power - temporarily - manually.

You can also use this new theme from Gatok

 

Link to comment
Share on other sites

  • 4 weeks later...
On 10/25/2021 at 11:09 PM, CMK aka gwyar said:

You can also use this new theme from Gatok

 

So sorry to not reply for so long, had a lot of stuff going on.  Thank you so much for taking the time to link those for me CMK!  I will absolutely go play with those themes.  Thanks again!

*Edit*

It appears I am already enjoying one of your themes (Enhanced 2-1 Thelema) on my Thelema that I primarily use for Replay on small SS MTL coils.  Wonderful theme.  I love how it shows me what Wattage the chip has chosen for each puff based off of my settings.  At least I think that's what it's doing? I'll never fully be able to wrap my brain around what Replay is doing lol.  But very cool theme, thank you!

Edited by EatingPattern
  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...