Does not work replay

[Evgeniy22 0]

Hello. Help with the problem on the Dna250c. When I turn on the replay mode, nothing happens. No memorization of the couple, does not offer them to remember. Coils are ss + nich.

[Wayneo 365]

Are the core wires SS or Nich?

Best practices are

• Core wires are Temp controllable wires
• Using a Replay enabled theme, and in a replay enabled profile

[Evgeniy22 0]

Wrong. Now there is an internal cantal over nichrome

[Wayneo 365]

Sorry? Who's wrong, what's wrong?

First you said

38 minutes ago, Evgeniy22 said:

Coils are ss + nich.

Are you now saying your coils are 

9 minutes ago, Evgeniy22 said:

Now there is an internal cantal over nichrome

Or do you not believe what I said were best practices?

[Evgeniy22 0]

I just remembered that I have other coils. And now the inner cantal braided nichrome. Could this affect that replay does not offer to remember the tightening?

[Wayneo 365]

Follow what I suggested in my first reply 

[Evgeniy22 0]

1 минуту назад, Wayneo сказал:

Follow what I suggested in my first reply 

I would love to, but the Russian language is such that it translates is not entirely correct. What materials are considered the best for replay? Thank you in advance

[Wayneo 365]

Stainless Steel 3xx, 4xx. Ti01, Ni200, NiFe 48/52 AS THE CORE (DOMINANT) material/wire

Not Nichrome.

[Evgeniy22 0]

9 минут назад, Wayneo сказал:

Stainless Steel 3xx, 4xx. Ti01, Ni200, NiFe 48/52 AS THE CORE (DOMINANT) material/wire

Not Nichrome.

Thank you very much. Now I will try to rewind at home and show the result.

[Evgeniy22 0]

16 часов назад, Wayneo сказал:

Stainless Steel 3xx, 4xx. Ti01, Ni200, NiFe 48/52 AS THE CORE (DOMINANT) material/wire

Not Nichrome.

Put the coils:inner(ss) +klepton nichrome. Replay still doesn't work. Does not fix puffs and does not show SAVE PUFF

[dwcraig1 276]

Make sure the Replay box is checked in EScribe  for the profile that your using.

While your in EScribe take note if there is a difference between cold ohms and live ohms while firing when using Device Monitor.

[Evgeniy22 0]

40 минут назад, dwcraig1 сказал:

Make sure the Replay box is checked in EScribe  for the profile that your using.

While your in EScribe take note if there is a difference between cold ohms and live ohms while firing when using Device Monitor.

The checkbox is worth it. There is a difference in monitoring between hot and cold when pressing faer. Cold 0.69. hot to 0.78

[Evgeniy22 0]

Now I put the drip in the mod. When hovering, save puff. I pressed to remember and caught fire that the soaring was remembered. When you press faer, an error appears: atomizer hek

[awsum140 57]

I'd suggest trying a simple, single wire coil made from only a TC material.  You have not mentioned what atomizer you are using which can effect how stable the resistance remains.

[Evgeniy22 0]

18 минут назад, awsum140 сказал:

I'd suggest trying a simple, single wire coil made from only a TC material.  You have not mentioned what atomizer you are using which can effect how stable the resistance remains.

I did ss + nichrome. Does not work