Wayneo 483 Posted August 4, 2019 Report Share Posted August 4, 2019 @lordmage IMHO I'd wait for an update from @nibs to hear that her mod has been returned and is working fine. Link to post Share on other sites
nibo 1 Posted August 4, 2019 Author Report Share Posted August 4, 2019 vor 22 Minuten schrieb Wayneo: @lordmage IMHO I'd wait for an update from @nibs to hear that her mod has been returned and is working fine. Hi. At this moment I wont‘t send my mod to service. I can live with an older software version. Link to post Share on other sites
nibo 1 Posted August 4, 2019 Author Report Share Posted August 4, 2019 PS. An older software version does not make trouble. The current one does. I don‘t get it why this should be a wire connection problem now. I will „sit and wait“. Ticket is closed from my side now. 1 Link to post Share on other sites
Wayneo 483 Posted August 4, 2019 Report Share Posted August 4, 2019 13 minutes ago, nibo said: PS. An older software version does not make trouble. The current one does. I don‘t get it why this should be a wire connection problem now. I will „sit and wait“. Ticket is closed from my side now. Very pragmatic approach @nibo Link to post Share on other sites
nibo 1 Posted August 4, 2019 Author Report Share Posted August 4, 2019 vor 21 Minuten schrieb Wayneo: Very pragmatic approach @nibo 😉 Link to post Share on other sites
lordmage 7 Posted August 4, 2019 Report Share Posted August 4, 2019 (edited) @Wayneo @nibo i am personally curious about what in sp38 makes it more sensitive to the "battery connect" "error up message vs SP 33. you would think a poor power connection would be a universal issue regardless of the software other than possible tolerance issues in the programing .. aka test point at pass at 1v fail at .95 v just an example god i dont know the ins and out of the programming. Edited August 4, 2019 by lordmage Link to post Share on other sites
Wayneo 483 Posted August 4, 2019 Report Share Posted August 4, 2019 @lordmage What can I say. I am no longer curious, and have no idea. (Long cuss filled rant removed before posting) My only suggestion would be for users to open an official Help Desk trouble ticket for problems of this nature (where it's clearly more than a usability problem). P.S Just so you know, Evolv has never asked me to temper my words in this moderator role. Link to post Share on other sites
lordmage 7 Posted August 4, 2019 Report Share Posted August 4, 2019 Let me amend my earlier comments publicly so far on sp38 i have not had an issue after wayneo sent me some info... if you have this issue please check your theme screen settings use this thread as a suggeted fix https://forum.evolvapor.com/topic/70342-dna250c-error-press-up/?tab=comments#comment-932290 so far so good no error at all for me... 1 Link to post Share on other sites
FAQZY 1 Posted August 15, 2019 Report Share Posted August 15, 2019 Its a big problem! i dont know what EScribe dont fixt it, and also get some updates for its like replay for NI80 comon EScribe Link to post Share on other sites
Wayneo 483 Posted August 15, 2019 Report Share Posted August 15, 2019 So hey @lordmage, did my help completely squash all the errors? I haven't heard from you or @nibo. @FAQZY You might want to read the post directly above yours. Link to post Share on other sites
lordmage 7 Posted September 22, 2019 Report Share Posted September 22, 2019 (edited) On 8/15/2019 at 5:21 PM, Wayneo said: So hey @lordmage, did my help completely squash all the errors? I haven't heard from you or @nibo. @FAQZY You might want to read the post directly above yours. sorry its been awhile but no not completely it did slow them down for a time. i had to revert to full default theme for a bit and they still came back unless i downgraded version so i can only assume it maybe due to the battery wiring issue i read about with another member in the UK and i dont have spares to send this one in to be checked so im sitting a version down without them, i tried both TC and non TC coils with default and without a default theme using the menu hack if needed and it seems the only clue to the issue has been possibly that with the higher version the tolerance for input power is a bit higher and that a poorly wired board may not sustain this level and it throws the error and resets. Edited September 22, 2019 by lordmage Link to post Share on other sites
saschacolussi 3 Posted December 17, 2019 Report Share Posted December 17, 2019 Anyone has anything new on this tread? i'm having the same issues Link to post Share on other sites
gruntus 0 Posted January 11, 2020 Report Share Posted January 11, 2020 I got a Paranormal 250C around 6 months ago and liked it so much that I ordered another last month. First one has never had a problem, but the new one has the Error press up issue. I don't know what FW / SP is on the original Paranormal 250C and I guess I need a way to bring that information up. Kinda afraid to plug it into the laptop. lol Link to post Share on other sites
dwcraig1 362 Posted January 11, 2020 Report Share Posted January 11, 2020 50 minutes ago, gruntus said: I got a Paranormal 250C around 6 months ago and liked it so much that I ordered another last month. First one has never had a problem, but the new one has the Error press up issue. I don't know what FW / SP is on the original Paranormal 250C and I guess I need a way to bring that information up. Kinda afraid to plug it into the laptop. lol Firmware version is in the right lower corner of Device Monitor in EScribe Link to post Share on other sites
saschacolussi 3 Posted January 13, 2020 Report Share Posted January 13, 2020 Any news on that error? I'm still getting it, and dont have any idea on how to mess with the firmware like you guys adviced Link to post Share on other sites
gruntus 0 Posted January 13, 2020 Report Share Posted January 13, 2020 On 1/11/2020 at 4:12 PM, dwcraig1 said: Firmware version is in the right lower corner of Device Monitor in EScribe Awesome Thank you for the tip Link to post Share on other sites
gruntus 0 Posted January 13, 2020 Report Share Posted January 13, 2020 4 hours ago, saschacolussi said: Any news on that error? I'm still getting it, and dont have any idea on how to mess with the firmware like you guys adviced I have upgraded and downgraded and was getting the error. I think it may have to do with using higher Watts, because I lowered one of my tanks to 60watts and I have not seen the error. in another post it looks like you can mail it in to have them do a HW patch, I may do that. Link to post Share on other sites
saschacolussi 3 Posted January 14, 2020 Report Share Posted January 14, 2020 HW patch? whats that? Link to post Share on other sites
gruntus 0 Posted January 14, 2020 Report Share Posted January 14, 2020 6 hours ago, saschacolussi said: HW patch? whats that? lol FW = firmware SW= Software HW= Hardware It would seem that a power connection was not soldered correctly and if you send it in they will do it. Link to post Share on other sites
AnnaR. 5 Posted February 15, 2020 Report Share Posted February 15, 2020 so many time left, but evolv don´t fix this. 1_1_SP33_INT.sw-service is always the last version without the "Error press Up" white screen after sleep on my VTBox :( Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now