Jump to content

Let's see your 75c's


adski

Recommended Posts

On 30/07/2017 at 7:22 PM, znapr said:

Here's my 3D printed DNA75C. It needs more finer sanding and in the next version I will make the secondary buttons larger. However, it feels rock solid in the hand and more importantly very comfortable!

fullsizeoutput_f06.jpeg

fullsizeoutput_f07.jpeg

fullsizeoutput_f08.jpeg

fullsizeoutput_f09.jpeg

beautiful little mod,I wish I have 3d printer...

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
On 30/07/2017 at 8:22 PM, znapr said:

Here's my 3D printed DNA75C. It needs more finer sanding and in the next version I will make the secondary buttons larger. However, it feels rock solid in the hand and more importantly very comfortable!

fullsizeoutput_f06.jpeg

fullsizeoutput_f07.jpeg

fullsizeoutput_f08.jpeg

fullsizeoutput_f09.jpeg

I find your mod really nice and it looks very small ! Bravo :)
I've printed a box for my DNA75c with my boyfriend, but it is much bigger ! Are the files public, in thingiverse or elsewhere ? If not, would you be ok to share it ?

Link to comment
Share on other sites

  • 4 months later...
  • 4 weeks later...

Here’s my latest. 

75c twin 20700 Sanyo 4250mah. 

Wideboy case from Modmaker uk,

fascia, buttons and source 510 from Stealthvape. 

Batteries soldered into a pack, (no weak battery message here) fascia and lid epoxied shut. 

Absolutly solid mod, not a rattle in sight. 

Sorry I forgot to take picture of inside before I glued it. 

8A73F0A7-43FB-48E3-880B-A080602E4384.jpeg

3BB59230-3F7E-44DD-9C31-C6EBC5F3F4B4.jpeg

5B60BA82-35DC-4B40-A7CE-5F1136D580BA.jpeg

  • Like 2
Link to comment
Share on other sites

  • 5 months later...
On 7/2/2017 at 8:58 AM, antyac2108 said:

Alpinetech GXL 

Dual 20700 

I just built this today I really like it. It went together fairly easy. I used a varitube V2 510 but I think I'm going to order a Cisco 510 and replace it. I don't like The varitube V2. Also I love this board. I really hope they come out with a 250C.

20170701_175152.jpg

@antyac2108 I stumbled upon this post you made and have a question for you! I see that you used an AlpineTech GXL2 box in your build, along with the MosMax 2x700 dual 21700/20700 sled. I'm planning on doing the same thing in a DNA250C build I plan to do in the next week or so. My question is... can you fit two 21700 batteries in there? Toward the "top" of the mod it appears that you have enough room between the edge of the left hand battery and the chip on the board to fit the extra 2mm width of two 21700 batteries. There is a chip coming off the board lower down in the picture, and it isn't clear if a 21700 can fit without touch that chip. Lastly, you don't want the side of the battery to touch the positive lead you have on the board, because if the wrap gets damaged (or melted) you'll have a short.

So the shorter version of my question is... Can you fit 21700 into there without touching the chips on the board or the positive and negative leads from the bottom of the board?

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...