Search the Community
Showing results for tags 'xvostickpro'.
I was getting a weak battery indication, so I hooked it up to the computer and was seeing voltage drop some where around 0.6-1v (didn't get a screen shot). So I started cleaning all of the contact points: Battery cover threads and contacts, positive contact, Ground contact, 510 pin, 510 ground contact, the screws and their holes, that connect the two half's of the mod. Best I can get is a .46 voltage drop. I'm use to seeing a 0.2 voltage drop on my Dani 25, with the same atomizers and builds. So started investigating and tinkering. I went as far as to loosen up the two half's of the XvoStickPro, so I could use one of my Samsung INR21700-40Ts, that I run in my Dani 25. It showed similar voltage drop to the Vapecell INR26650 G53, with in a couple hundredths of a volt... Is a 0.5 voltage drop, the best that I'm going to get or should I be expecting to see closer to something closer to the 0.2 voltage drop, that I get on my Dani 25 or am I comparing apples to oranges?.. Best I've I can get, after cleaning all contacts and threads on my XvoStickPro running a Vapcell INR26650 G53: Originally it came with a DNA 40, back in 2018 I converted it to a DNA 60 for SSTC. https://i.imgur.com/kkAmiUL.jpg