Search the Community
Showing results for tags 'green'.
Found 5 results
439 downloadsAvailable in 6 colors! Black - Red - Blue - Green - Orange (Ultem) - White I decided to re-design the iOS Theme for my new mod design. All the mix-colored heavy themes were just too much all the time, so I knew that I had to make something simple this time. I settled on doing a theme that Ι wouldn't get tired of looking at, using the controls of the iOS theme that I really love. I started developing V2 of this theme with the addition of red in mind and ended up expanding the color options more. The soul of the theme is to be a single color, so now you can choose more than black or white. The Orange specifically was added to match my Ultem drip tips, that is why it is in a darker shade. V1 of this Theme was known as B&W, that name got left behind in V2. RIP If you like this theme, you can personally help me out with a donation by clicking the PayPal button below Main Screens Ok, lets say your mod is now unlocked. These are the main vaping screens you're going to spend the most amount of time on. Wattage: Temp Control: Replay Mode: Menus The familiar menus from the iOS Theme. Coil: Preheat/Boost: Puff info: Settings: Difference is in the details... ...and I'm all about the details. Smart Watt Adjust Adjusting watts is different for every wattage range to cater both MTL and DTL vapers. 14.9W and below = adjusted by 0.1 15-29.5W= adjusted by 0.5 30-99W = adjusted by 1 100W and above = adjusted by 5 (Need to register a wattage number before the change applies) The Most Accurate Battery Gauges Extremely accurate battery gauges. The battery will turn red when you are at 20% or below. Need to charge 'em once in a while! Preheat On/Off Indicator The speedometer's needle will move and turn red when Preheat/ Boost is on. Swap battery % for time I felt like the "time or battery %" option shouldn't be missing from this theme. Some people may be used to it from the iOS theme. The option to choose which one you prefer is once again here. Hide the date Don't like the date format? Want a cleaner lock screen? You have the option to hide the date now. Color Mapping chart Like all my other themes, the record options are colored so that you know what line means what in the chart. Multiple Battery Volts In this sub-menu, you can check individual battery volts for up to 4 batteries. Batteries are named 1-4 in order to know if one is misbehaving. (Displaying multiple batteries is only supported by DNA 250C mods)
14,194 downloadsThis is a modified version of the DJLsb theme that came pre-installed on my Lost Vape Paranormal/Therion 75c mods - full credit goes out to Daniel@djlsbvapes for the design of this excellent user interface that offers an array of functionality without being too cluttered and over complicated. I was unable to find a Replay enabled version, so took up the challenge of integrating Evolv's main screen UI so I could continue using my favorite theme with the added benefit of Replay. Edit: Daniel@djlsbvapes as since released an updated version with Replay, a copy of which can be found on his website. Older 75c devices - so long as you have taken all the right steps to upgrade your firmware this theme will work just fine - I found YouTube video: 'Replay Mode - how to get it on your 75C' by 'vaping v1ck' helpful, please also check here for guidance. 250c devices - no firmware upgrade required, just upload and go. Happy days 😉 UIColourToggle function available in V2.1 onwards. This feature appears on both the MAIN and REPLAY screens allowing you to toggle your UI between white and a mono color of your choosing for matchy matchy customisation i.e. orange matches up really well with silver Paranormal/wooden panels, as does Stealth with my carbon/black edition Therion for a classy toned-down look - other colour options to suit Mirage are also available from the download section. UI toggle buttons are conveniently located to provide quick switching between mono color and the default bright white display - useful in bright sunny conditions 🙂 Other modifications include: - PowerBank UI included to support USB-On-the-go (new) - ‘Warmth of Puff’ feature included on REPLAY screen - Up to 4x battery voltages included - Minor tweaks to button/field positions and removal of separation lines to provide clearer/ergonomic viewing. - Lost Vape emblem in place of full logo - for sharper imaging. - Revised battery indicators for improved vividness. Fully optimised for dna250c, and cross-compatible with dna75c devices ColourToggle options: Green, Orange, Stealth, Blue, Red, Cyan, Purple and now Magenta...choose to best suit your setup.
1,054 downloadsVersion 1.1 This update introduces a visually enhanced Replay experience. Mx2: Clean and simple main screen that adapts to your needs! Easy navigation with icons menu. Theme is available in both Green and Blue. Works on DNA 75c and 250c devices with Replay Here is the main feature of this theme. The information displayed on your screen will change according to your vape style. Displayed info adapts for the following: Replay mode with any temperature sensitive material selected (pre-activated) Replay mode with selected material "Watts" (pre-activated) Replay Activated Temperature control Wattage Mode Each of these screens will provide different data according to your needs and your specific vape style. No need to navigate sub-menus to find what you're looking for. All you'll ever need is on your screen Icon menu is simple to navigate, yet providing all the information your board can offer. "Back" and "Home" buttons will help you navigate easier. Designed for simplicity Puff Charts screen gives you the option to record 9 different type of data for your puffs. These 9 options are represented by the colors they have on the chart. No more guessing! Hide info is a new feature added in version 1.1. You can now hide the battery %, Ohms and Voltage with Amperage from the main screen. You can have the "clean" screen experience instead of the more technical one. When hiding "battery %", the battery icons will get bigger with more accurate representation. It's all about customization! All and all an advanced theme even a simple user can navigate. Try it out and let me know what you think in the comments and reviews. The Mx2 theme is provided for free. If you like my work and want me to create more DNA color themes, you can always support me with a secure PayPal donation by clicking the button below: You can find my new theme here: The iOS Theme *Sidenote: Huge credits to @niandra3 . His themes are the only ones i enjoyed using when i got my dna board. "Mx2" was inspired and based on his "Clean Black and Blue V1.7" theme. Check out his latest theme here: Clean Colors
793 downloadsNOTE: I have a more up to date theme called "Plain and Simple" that now also offers a green-themed option. So if you want something minimal and simple, check that one out as well. It also supports TC, Replay, Wattage modes, etc.. it is just a bit improved over this one in a few ways I think. ---------------------------------------------- Mean Green v1.0 Highlights: This theme is green. That's about it (it's pretty straightforward). Supports REPLAY on 75c and 250c devices. See info below if you are having issues with Replay on 75c. You can seen screenshots below of what the Main Screen looks like in Replay mode, and what the Settings screen looks like when Replay is enabled (there's more options visible). Features: Lock screen: battery level, time/date (which you can hide) Main screen: battery level, wattage, temp (if in TC mode), voltage (if not in TC mode), profile, coil resistance, current, Replay on/off if enabled in your profile Settings: Replay info, units F/C, puff counter Display: brightness, stealth, time/date set, hide time/date ---------------------------------------------- Replay info: Latest version works with Replay for 75c devices. BUT you need to have the International Edition of EScribe 2.0 SP15.1 or greater. I also believe your 75c needs to have the right firmware as well (at least 1.1 SP33.2 - that one works for me), once you update ESscribe it should prompt you to update firmware for your device. You also MUST enable Replay in your EScribe profile for it to work. ---------------------------------------------- Let me know what you think! You all always have the best ideas for fixes and improvements, so don't be shy! Leave a review or comment below.. (even if you don't like it I need the feedback) Main Screen | Settings Page (when Replay enabled)