Search the Community
Showing results for tags 'control'.
Found 2 results
I've been searching for days, trying to figure this out on my own but I can't seem to do it. I've been trying to get SS 316L to work in temp control and it seems to be very difficult. For instance, I will build coils (or use pre-made, I've tried both), and I aim to be somewhere around 0.4-0.5ohms. I lightly dry burn SS 316L at 10watts in a dark room and get all of the hot spots out. I then wick the coil and measure the cold resistance in Escribe. My most recent coil comes in at 0.4 @ 72° room temp, but when I vape the coil, the resistance also rises (I know SS 316L does this), but it will raise or lower from 0.39-0.45 and my mod can't seem to account for this variation correctly. Vapor production quickly declines and flavor mutes. I've tried countless different .csv's but none of them seem to fix the issue. In my most recent build, I will attempt to fire 0.4ohms at 40watts 475° but my mod will usually ask me if I connected a new atomizer at 0.43ohms. If I choose 'no, use old settings' then my vapor is basically non-existant. If I change the resistance to 0.43 then the temp control is all over the place and I will get dry hits. Any advice? Are my builds just crappy/inconsistent? Should I try a material that isn't SS 316L? I've tried spaced coils and they seem to work a bit better, but not by much. Do I need a different .csv? My atomizers are Gas Mods GR1 and B2K. Tha. nks! Edit: I've made sure that my lead connections are extra secure, that's not the problem.