eaknazareth
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by eaknazareth
-
-
19 minutes ago, dwcraig1 said:
There have been situations where the DNA board didn't want to work with some USB 3.0 ports. But would work on USB 2.0
Try usb2.0 as usual, discouraged for three days, thank you very much.Wayneo dwcraig1🙏💗
-
9 minutes ago, dwcraig1 said:
Most times this error is caused by a bad USB cable, do you have some more that you could try? I understand that you already tried one other one but try some more if possible.
I have changed the 4 lines, but I have an error with different numbers. Change the computer port usb error😭 Thank for you help dwcraig1🙏
-
-
3 minutes ago, dwcraig1 said:
Probably 30 seconds but give it 1 minute before putting it back in.
Thank you very much. 30 minutes. Test again. Go to the market before taking out the battery🙏🙏
-
1 minute ago, dwcraig1 said:
Removing the battery and leaving it out for a minute will reboot the board, did you try that already?
Still haven't removed the battery at all, try removing it first. How long does it take? Thank you very much. dwcraig1
-
-
2 minutes ago, dwcraig1 said:
That seems to be the latest firmware for a DNA250 C
😱
Can you tell me? I'm all confused and can't go back to the factory. Thank dwcraig1🙏😭
-
The firmware in the mod seems to have a problem, but I don't know how to clear it. Please teach me.
-
-
18 minutes ago, dwcraig1 said:
Are you able to try using a different data cable?
Can connect, but when uploading mod error, fetch data from mod to Computer can Change the cable to 3 lines, does not pass😭 Thank dwcraig1🙏
-
2 minutes ago, dwcraig1 said:
Are you able to try using a different data cable?
Hello, I have replaced the cable as before, this cable can be sent from the mod into the program. -
-
7 hours ago, Wayneo said:
At this point I have NO CLUE what version(s) of escribe you have installed. Delete all copies drom your PC so you can start fresh. That was not for color mods
Download and install the link below.
https://downloads.evolvapor.com/SetupEScribe2_SP19_INT_ServicePack.exeMake sure to open the proper folder for your mod board type.
Hello. I can wake up. I just try to delete them all. Start over Thank you for your advice.
-
Wayneo Thank you very much. I would like to sleep first.🙏
-
13 minutes ago, Wayneo said:
Just install SP19 (link in my sig) and then the most current for your mod.
I install this link here http://www.evolvapor.com/software/SetupES.exe it completed
continue this program
EScribe Suite 2.0 SP19 inter
Failed EEPROM 😭 my headache -
14 minutes ago, Wayneo said:
Great news. Now go make your changes one at a time, and after each change do an upload to mod. Although you can make many changes at a time, something is wrong. When you find the offending change, let us know. Personally, I'd do them in this order. Escribe/Firmware then mod/materials, then theme. 👍
Wayneo Thank you so much. 🙏Can you suggest Escribe/Firmware version get work this mod.?
-
29 minutes ago, Wayneo said:
Under the 'Help' menu, down at the bottom, the mod has been creating backups for you. See if you can restore to a time before you attempted your changes.
I tried to do it in the backup menu and I didn't get through the error. thank you Wayneo🙏
-
9 minutes ago, Wayneo said:
What were you doing beforehand that made you want to upload to the mod?
I want to put the punch menu into the mod so I upgrade
-
-
้How to fix? EEPROM
in Report a Bug
Posted
Thank you so much Wayneo🙏