Jump to content

niandra3

Members
  • Posts

    109
  • Joined

  • Last visited

  • Days Won

    7

Files posted by niandra3

  1. Clean Colors (75C/100C/250C w/Replay - Many colors available)

    Note: The lightning bolt on the battery is only visible while charging.
    Replay ready! (with temp control and wattage modes available too) - See below if you are having trouble with Replay Main menu is on the top right You can hide data on main screen in Main Screen menu (resistance, voltage, etc) You can hide date/time from Lock screen in Time Config page (also can choose MM/DD or DD/MM date format) There is now a ONE WATT version for those who want one-watt increments on the main screen (regular version is 5-watt increments). Now available in BLUE, BLACK, GREEN, and RED see downloads page: Clean-Color--ONE-WATT-#_#.ecigtheme A LOT of other stuff.. check it out!' If you have requests for new colors, or other customization, let me know in the comments section and I can usually whip something up pretty quickly. 
    --------------------------------------------------------------
    Replay info: This theme works with Replay for 75c devices (250c devices work with Replay by default). BUT you need to have the International Edition of EScribe 2.0 SP15.1 or later. Your 75c needs to have the right firmware as well (at least 1.1 SP33.2 -  that one works for me), once you update ESscribe and connect your device it should prompt you to update firmware. You also MUST enable Replay in your EScribe profile for it to work.
    Using replay: once the above has been completed, load this theme and switch to a replay-enabled profile. There should be a "NO REPLAY" button seen on the main screen. This means there aren't yet any puffs to save. So take a few puffs, until you find one you like. Then the button should change to "SAVE," and you can click that to save that latest puff. Once Saved, the button changes to "PLAYING" and you are in Replay mode. Click that if you want to end Replay. 
    If you are having trouble, check the Replay menu because it gives you more info: 
    Replay Available (if theme/coil supports Replay [read-only]) Replay Ready (Replay is ready to be activated [read-only]) Replay Active (you can toggle this switch to save your last puff and activate Replay).  You also cannot use a plain kanthal coil for Replay. You can use any temp sensing wire, including combinations (e.g. SS wrapped with kanthal).  --------------------------------------------------------------
    If anyone has suggestions, improvements, bugs, or anything else, please reach out in the comments below and/or leave a review. New update coming soon!! Thanks!
    Here are the available color options. Let me know if you have requests for others:

    9,716 downloads

       (23 reviews)

    119 comments

    Updated

  2. Mean Green (75c/250c w/Replay)

    NOTE: I have a more up to date theme called "Plain and Simple" that now also offers a green-themed option. So if you want something minimal and simple, check that one out as well. It also supports TC, Replay, Wattage modes, etc.. it is just a bit improved over this one in a few ways I think. 
    ----------------------------------------------
    Mean Green v1.0
    Highlights:
    This theme is green. That's about it (it's pretty straightforward). Supports REPLAY on 75c and 250c devices. See info below if you are having issues with Replay on 75c. You can seen screenshots below of what the Main Screen looks like in Replay mode, and what the Settings screen looks like when Replay is enabled (there's more options visible).
    Features:
    Lock screen: battery level, time/date (which you can hide) Main screen: battery level, wattage, temp (if in TC mode), voltage (if not in TC mode), profile, coil resistance, current, Replay on/off if enabled in your profile Settings: Replay info, units F/C, puff counter Display: brightness, stealth, time/date set, hide time/date ----------------------------------------------
    Replay info: Latest version works with Replay for 75c devices. BUT you need to have the International Edition of EScribe 2.0 SP15.1 or greater. I also believe your 75c needs to have the right firmware as well (at least 1.1 SP33.2  -  that one works for me), once you update ESscribe it should prompt you to update firmware for your device. You also MUST enable Replay in your EScribe profile for it to work. 
    ----------------------------------------------
    Let me know what you think! You all always have the best ideas for fixes and improvements, so don't be shy! Leave a review or comment below.. (even if you don't like it  I need the feedback)
    Main Screen | Settings Page (when Replay enabled)
        

    1,121 downloads

       (1 review)

    0 comments

    Updated

  3. Plain and Simple - 75C/250C w/Replay! - also Extra Simple version & colors available

    This is a theme for those of us that want something simple and easy to read that just works. There's no endless graphs or settings to tweak, just a simple vaping experience. It still supports Replay, temp control, wattage mode, etc. Just less of the extra junk. Check out my other theme if you want something more full-featured. 
    Versions:
    Plain and Simple: standard theme with menu, info, data etc. (see screenshots above). Replay ready, as well TC/wattage modes (4 colors available) SUPER Simple: Just the main screen (Replay ready, can change profile) (4 colors available) Note: The battery icons only show lightning bolts when the device is charging. See screenshots below for what it looks like normally. 
    ----------------------------------------------
    Replay info: This theme works with Replay for 75c devices (250c can do Replay by default). BUT you need to have the International Edition of EScribe 2.0 SP15.1 or later. Your 75c needs to have the right firmware as well (at least 1.1 SP33.2 -  that one works for me), once you update ESscribe and connect your device it should prompt you to update firmware. You also MUST enable Replay in your EScribe profile for it to work.
    Using replay: Once the above has been completed, load this theme and switch to a replay-enabled profile. There should be a "NO REPLAY" button seen on the main screen. This means there aren't yet any puffs to save. So take a few puffs, until you find one you like. Then the button should change to "SAVE," and you can click that to save that latest puff. Once Saved, the button changes to "PLAYING." Click that if you want to end Replay. 
    ----------------------------------------------
    Let me know what you think! Please leave suggestions, improvements, or bugs in the comments or reviews. Thanks!
    Available colors:
          

    1,082 downloads

       (3 reviews)

    0 comments

    Updated

×
×
  • Create New...