Jump to content

eucalyptus.

Members
  • Posts

    39
  • Joined

  • Last visited

  • Days Won

    8

Posts posted by eucalyptus.

  1.  

    Hello.

    The same happened when trying themes using external fonts.

    When the theme PC and the eScribe PC are different, there is a font with the same name, it is likely to occur if the font width is larger than the theme setting.

    I solved the problem by writing a standard theme.

    But my screen was what happened with "MAIN".

    I pray for your board to heal.

  2. Thanks for reply!.

    I have examined it in more detail.

    1. F/W
    I tried reinstalling Rev 19 and Rev 20, but there was no change.

    2. Current
    I compared it with a new board.
    · High current consumption
    · Low end voltage (approx. 1.2V)
    · It does not become standby
    Therefore, not only F/W but also element failure is suspected.

    Attach the measurement result.
    Oscilloscope: rigol DS 1054 Z
    Voltage source: DDC
    Current probe: Hantek CC-65

    tr_standby.png: trouble DNA75c standby
    tr_endv.png: troble DNA75c end-voltage.
    nm_standby.png: New DNA75c standby.
    nm_endv.png: New DNA75c end-voltage.
     

    nm_standby.png

    tr_endv.png

    tr_standby.png

    nm_endv.png

  3. Hello.

    My board is currently experiencing problems.

    That is the discharge of the battery.

    1. The board does not enter sleep mode
     * In the non-charging state, the batteries decrease when locking and not locking.
     * VTC4 It has changed from 99% to 70% by leaving for 2 hours.
     * USB connection, board is generating heat even in non-charging state.
    2. The board will use the battery until the end voltage of the battery.
     * If left unattended, I will use the battery until it is empty.
     * About 0.9 V or so.

    My board was not originating from the beginning.
    Perhaps, after doing "restore default", it seems that a phenomenon is occurring.

    My board does not use production utility.
    The default setting is the initial state.
    Items other than "Theme" are not operated.

    Board Information:
    Evolv DNA 75 Color
    Device Information
    Serial Number    YBAK FGEW PKWY
    Production History
    Friday, April 21, 2017, 3:53 PM
         Board programmed

    Revision.20.

    Thank you.
     

  4. Hello.

    My DNA 75C is "short" when remove the atomizer.

    After resetting, it becomes "CHECK ATOMIZER" before attaching the atomizer.

    I examined it with ATOMIZER ANALYZER, after removing the atomizer, the value of 100 ohms or more appears.

    My MOD is actually not short-circuited.

    Is there a problem with my board? .

    Revision:20
    Theme:Default Theme. ( "Factory Setting Reset." )
     

    75c_1.png

    75c_2.png

    75c_3.png

    75_1.png

    75_2.png

  5. Hello.

    "Temp Adjustment mode" added on eScribe 1.0.42.

    Likewise "Voltage Adjustment mode" setup on Profile?.
     #Show Voltage on big screen. + / - adjust voltage. Watt and Temp Control is Off.

    Likewise "DRY BURN mode" setup on Profile?.
     #Show Ohms on big screen. + / - adjust watt or voltage or temp.
     #Enhanced time protection setup (15sec/20sec)  more better!.

    Likewise "COIL SETUP mode" setup on Profile?.
     #Show Ohms on big screen. +/ - is off.
     #Puff trigger : 1W / 0.1sec. sense coil reg.
     #measurement ohms on screen. hold display (until sleep).

    usecase : 
     a.setup "DRY BURN MODE" on profile7.
     b.setup "COIL SETUP MODE" on profile8.
     c.adjust DRY BURN MODE Power and time protection on profile 7.

     1.Dna Function "power lock mode".
     2.Push +/- button select "profile 8".
     3.coil setup and check ( push puff ).
     4.Push +/- button select "profile 7".
     5.dry burn ( push puff ).
     6.select profile 8 and 7, make coil!.
      #like "tab 521".


     

×
×
  • Create New...