[Battery sleds]

^^^excellent

[DotBox DNA200 No charge]

Alcohol

[DotBox DNA200 No charge]

Might there be some liquid on the board perhaps? Easy enough to check.

[Missing Custom wire option?]

^^^^^Well done.

[DNA75 Eats through Battery]

So tonight before I left for work I changed the battery in my SMY 75, it was down to 3.4 volts on the screen and no sign of weak battery.
I used probably 8 ml of juice before changing the battery, maybe more. Nothing too scientific about it but I noticed nothing unusual about battery life

[Missing Custom wire option?]

kingdal said:

Just to add, its the same problem as this post, except I would like to be able to upload a CSV file

https://forum.evolvapor.com/topic/66958-topic/?do=findComment&comment=902439

Thanks

The post linked was answered correctly.

[Missing Custom wire option?]

kingdal said:

Hi guys

First time DNA200 user here. I was trying to figure out how to set up custom wire (Nife48) on both an eFusion Duo and a Boxer 133w. Looking at the eScribe tutorial, it shows to go to a Preset, click the wire type and choose Custom, and from there you can upload a CSV file. My problem is, I don't have that Custom option. When I click on a Preset, it shows Nickel, SS316 and Ti and that's it. No Custom.

I'm running eCcribe 1.0.42. What am i missing?

Thanks

Go here, select your wire, use DNA200 tab. add to EScribe, add to device, upload to device.
Use any browser except Internet Explorer
http://www.steam-engine.org/wirewiz.asp
(working from the materials tab)

[DNA75 Eats through Battery]

So as some of you know I received my SMY SDNA75 yesterday and am using a LG HD2 (2000mah, 25 amp) in it. My atty is a Bellus firing at 40 watts with 1 sec hard preheat @ 50 watts. I'm still kind of testing it out but so far I'm not noticing anything negative concerning battery life. I'm using it just as I use my Silo 900 and honestly I'm not noticing any difference.
My voltage right now is reading 3.6 volts and still no sign of "weak battery". I'm going to use it till it tells me. I do expect to get less time as the watt hours are not the same.

[LED Configurable?]

MegaVape said:

Is there a on or off setting for the LED?

I haven't looked for it yet but yes you can turn it off.
It's at the bottom of the "Themes" page.

[Temperature control and low ohms]

The board is spec'd at 50 amps continuous output and 55 amps burst, you are well under that.

[Let's see your 75's!]

If only they made a 75 with the foot print of a 40...LOL

[Let's see your 75's!]

So it arrived, took me a bit to get it set up (sorry Daniel). Using HE4's while the HD2's charge (might not even use them with this).
For starters the mod's not stainless steel only looks like it.
Except for the horned top it's smaller than a ERM, really strong spring in the 510. I wish the 510's body was higher than the mods top by a hair but oh well.
Really liking it so far, I can't believe how small it is.
EDIT: So I switched to the LG HD2's from the HE4's after comparing the sag during firing using the same atomizer 40/50 watts) and full charged batteries.
Both batteries are new also. The HD2 dipped to 3.75 volts and the HE4 dipped to 3.56 volts . No sign of "weak battery", even put on my Aromamizer with dual clapton's @ 75 watts but of coarse the battery was full charge. It's going to work for the "test"

 
 
 

[DotBox DNA200 No charge]

I am not as techy as some other members, more will come on eventually but I would try a to do a "perform a USB recovery charge"
That is found in the bottom right hand corner of device monitor/diagnostics/advanced/perform usb recovery. It's a slow process.
But first you must log into Evolv under the 'internet" tab of EScribe. You can search this forum for more info on that also. 

[DNA75 EScibe Settings]

I for sure rushed to judgement on my earlier post, been digging online some. It seems to be one of the more powerful 18650's going. But there's controversy as to whether it's an ICR or a hybrid. I shall dig some more. 

[DNA75 EScibe Settings]

I'll still pass

[Early Firmware and EScribe Suite Discussion Thread]

Sorry, have to ask, did you "push" the manufacturer's  settings " button?

[DNA75 EScibe Settings]

I didn't know something like this even existed, I can easily see a new vaper getting one of these to blow some clouds.
I would avoid this battery like as if it were the plague. In a regulated mod it wouldn't be all that dangerous but in a mechanical it has the makings of an accident looking for a place to happen.


 

[hcigar TV75 atomizer analyzer not working]

VapingBad said:

When looking at the mod resistance in atomiser analyser with the tool or dead short and it reads 0.00x as you are tightening the tool and ends up displaying ? your resistance is so low that the test pulse is hitting the current limit and therefore the mod resistance is less than 2 milliohm.

So would the correct setting be "zero" then?

[RDA retaining heat possible source of base resistance climbing?]

Perhaps one of these or a 510 to 510 adapter would help you test your theory.

I believe your theory is a pretty good one, I doubt if locking the ohms will do good enough, a poor connection is just that....poor

[VapeCige VTBOX 200]

This is the one that I put into VTbox200:

Turnigy nano-tech 1300mah 3S 25~50C Lipo Pack (AR Warehouse)

The XT60  has to be changed to T plug and the power wires shortened. The battery is just slightly longer than the original.
 

[Aspire Cleito SS316L Clapton]

You might get what you need from here:
http://www.steam-engine.org/wirewiz.asp
select your wire type from the drop down list and hit the DNA200 tab to download the CSV. Do this with any browser except Internet Explorer.

[Hcigar VT200 battery options]

Among other things I seemed to have missed the fact that Hcigar used a XT30 instead of the XT60 which comes on the Turnigy 1300.

[Hcigar VT200 battery options]

I suspect it will go in as if it was made for it.  I had to shorten the power wires on the one I installed in a Vapecige box, the picture of the Hcgar battery shows pretty long wires so I think it will fit right in. Let us known how it went.

[RDA retaining heat possible source of base resistance climbing?]

I would image that it's easy enough to cut the legs off by over tightening the grub screws in the posts but them not being tight enough is going to cause problems like you describe. It may be else where but it sounds like a connection issue.
I just about never use the hex key that comes with an atty, I have better ones.

[Puff counter resets automatically?]

BillW50 said:

Two 18650 charged to 4.09v

GND = 0v
Pin 1 = 4.09v
Pin 2 = 8.18v
Pin 3 = 8.18v

No batteries on USB power only

GND = 0v
Pin 1 = 0v
Pin 2 = 4.83v
Pin 3 = 4.83v

Scoped it and yes, it is a flat DC level.

I see that is as it should be