-
Posts
2,316 -
Joined
-
Last visited
-
Days Won
145
Content Type
Profiles
Forums
Downloads
Posts posted by dwcraig1
-
-
-
https://www.stealthvape.co.uk/product/evolv-dna60-usb-board/
or
https://www.protovapor.com/product/evolv-1a-micro-usb-datacharging-board/
I would think that there are more places.
- 1
-
Have you tried another cable? Might be caused by dirty USB port on mod, lint from pocket, ect.
-
I have been mixing my own liquid for over 12 years now. I use to use sorbitol for sweetner but because of how fast it would gunk up my coils I switched to ethyl malto. You might want to research about using sucralose.
-
Yes, you got it. Use Device Monitor in EScribe to see it live.
Be sure to check the "Power" and "Power Set: boxes.
- 1
-
-
-
Yes, be worried. Try here:
- 1
-
-
Are you making the adjustment in EScribe? And uploading the settings? I doubt if changing the screen will help. Could the problem be theme related?
- 1
-
If you have not got it figured out yet here's how:
Leave device connected via USB and restart your computer, open EScribe and you should be back in business. Post your results if you would please.
- 1
-
Did you put the first one back in or is a 3rd one?
- 1
-
Well the theme on a 60 is just a bunch of images with no control. What about session mode, is that off. Pretty unusual problem. DNA60's is what I mostly use. Any little strands of wire sticking about?
-
-
-
Under the "Help" tab on top left of EScribe choose "Back Ups" and choose your file and upload settings.
-
As Ni80 isn't a wire for use with temp control just use "Watts"
A lot of good information here: https://www.steam-engine.org/
- 1
-
Yes, #3 looks like the one.
- 1
-
Take a good look at where the pins from the JST connector are soldered to the board,perhaps just go ahead and re-solder them.
- 3
-
Can you measure the main power to the board with a meter while firing. Is the a plug on the main power leads?
-
Measure the main power leads too while your at it. (on the board)
-
Just a question, are you using the same cells to power the test setup as used in the mod?
My 250C dropped 7% in just under 3 days just sitting which I expected.
-
So I deceided to try to duplicate this problem. Here is what happens for me. I'm using a profile and change it to another and select it with the fire button. But if I don't fire that new profile and remove and replace the battery it reverts back to the original profile. Now if I fire the new profile and remove and replace the battery the new profile stays put.
- 1
-
This option is for 100C and 75C only
- 1
DNA 250C broken display
in General Discussion
Posted
https://www.protovapor.com/product/replacement-dna-screen/
And here but "Out of Stock" at the moment: https://www.stealthvape.co.uk/product-category/evolv/evolv-screens/