retird

Moderators
  • Content Count

    2,315
  • Joined

  • Last visited

  • Days Won

    75

Everything posted by retird

  1. retird

    250 DNA does not work

    With fully charged batteries in the device what are the voltage readings and % of charge showing in Device Monitor within EScribe?
  2. retird

    250 DNA does not work

    Seeing Check Battery message. Take out the batteries and check the voltage of each battery with a meter. What is the voltage of each? Have you got another set of batteries to try? When batteries get too low they will not charge inside the device. Any more information you can give?
  3. retird

    250 DNA does not work

    There is nothing in your video....
  4. retird

    Orion Go upgrade to Orion Plus

    Here is Evolv's site showing the version they have for download.... https://www.evolvapor.com/escribe And here is another thread here showing recommended version and an early service pack should you want to try it... No I have not installed the version you post which may update the Orion to Plus version.... It looks like Lost Vape is using it....
  5. retird

    controllo temperatura 316L DNA 75

    @dwcraig1 I was going on the "profile he created" and thought maybe he had created a wire material (SS316L V3.5) and was using that.... a bit more info from @Matteo Galdi would be nice. Please use your native language if you can and we will translate... THX
  6. retird

    controllo temperatura 316L DNA 75

    Try using the SS316 material.
  7. retird

    controllo temperatura 316L DNA 75

    Post a screenshot showing the n316L V3.5 material Example screenshot:
  8. retird

    TFV16

    Take the kanthal out of the coil and see how replay reacts...
  9. Of all the default theme fonts the one you want is not listed? What font are you wanting to add?
  10. retird

    TFV16

    If Replay is not activated then the DNA is not recognizing the coil as a material that is supported by Replay (assuming Replay is selected in the settings of the profile @Vitalii is using). Probably has something to do with the coil build with Kanthal is my guess... not really much information provided to further discuss...
  11. retird

    TFV16

    So, replay doesn't work with the single coil using the TFV16 but only give you the option to play. Do any of the coils (single, double, or triple) work in straight Temperature Control mode using the TFV16 tank? There are some tanks that use pre-made coils that don't work with TC or Replay because of several reasons. Tank design, coil connection points to the coil shell, and coils that are not truly Nickel, Titanium, etc. I don't have a TFV16 but my guess is that either the tank or the pre-made coils is not compatible with replay (assuming the coils don't work in straight Temperature Control mode). SMOK may have answers for you. Also, you could start a ticket with Evolv and explain to them and see what they say... https://helpdesk.evolvapor.com/index.php?a=add&category=1 SMOK says the mesh coils are Nickel-Chrome....... This may help...... https://spinfuel.com/ni200-and-ni-chrome-a-brief-look/ and a short clip from that link is: Ni-Chrome isn’t a wire used for Temperature Control, though many vapers mistakenly thought so. If you build your own coils you should buy pure nickel, or Ni200, for many reasons.
  12. retird

    Custom Fire Button

    No..... that only measures voltage and gives a readout....
  13. retird

    Custom Fire Button

    Doesn't matter when the fire button only has 2 pins.
  14. retird

    **** Evolv

    Looks like you have many options.... at this point it is unclear what the issue with the device really is. To say it is definitely a sketchy chip is a stretch at this point I think. It may even be poor assembly. You can google that mod here in this forum and see if there are any posts to read that other owners may have posted and had issues with the mod discussed here ...... Efun Warranty..... https://www.efun.top/warranty-policy Efun Customer service (with e-mail addresses) .... https://www.efun.top/customer-service I sent two e-mails to them and the e-mails went thru using Windown 10 and Chrome ...... used Yahoo mail... and sent a second e-mail from another e-mail provider I use...... Evolv Warranty:.... https://www.evolvapor.com/warranty Start Ticket with Evolv: https://helpdesk.evolvapor.com/index.php?a=add&category=1 You probably have looked at all these links already but I'm posting them so you and others who may come here will have them in one place... I would like to respond to many of your negative comments but that serves no positive purpose as we are volunteers just trying to help.
  15. retird

    **** Evolv

    hum, you have several options to get this resolved. The easiest (and probably the best) is to start a ticket with Evolv. Their warranty plainly states you are responsible for shipping to them. As you stated earlier they even replaced a board for you that was out of warranty. There is a process with PayPal (Dispute and Claims processes) which could result in a full refund or replacement if that is your preference. China resolution is not clear at this point. (opening the device may void any warranty you have with China vendor). The guys here are trying to help you out. The choice is yours. Good Luck.....
  16. retird

    **** Evolv

    Could be something not connected properly in the battery tray, the batteries, maybe something with the mod wiring going to the board, or maybe something with the board.... Since it was DOA from China you might see if they will replace it. You also could start a ticket with Evolv. To reset device with Escribe go to: Tools/Diagnostics/Reboot Device/Click on your choice of soft or hard reboot If you don't have the reset choices go to : Options/User Interface and set it to Manufacturer and you should then have reset ability.
  17. retird

    **** Evolv

    You posted this in March, 2018 I think.... hopefully you have updated EScribe to the latest version so it can recognize the 250C.... that would eliminate EScribe as the issue I think....
  18. retird

    Check atomizer

    Many, many posts here about contact coils and DNA technology.... I offer a suggestion to try a spaced coil as many have found this solves their issues.... Good luck...
  19. retird

    Check atomizer

    Build spaced coil and give it a try.....
  20. retird

    Check atomizer

    Does it work just fine while vaping in TC mode? Most of the time temp protect means you have reached the desired temp... poor connections or contact between coils wraps can cause issues and give temp protect message...
  21. retird

    How to connect to Escribe

    Try a different USB cable..... must be a cable that can transfer data and not just a charge only cable... this is the first thing to try...
  22. retird

    Request for Escribe on Apple IOS devices

    Duplicate posts may cause confusion...... see your other post for replies.
  23. retird

    Request for escribe software on android!

    You should contact the person that made this app for Android and ask him. As far as I know this app is not from Evolv. You can contact the maker of this app at dnamate.info@gmail.com
  24. https://www.originalmoddog.it/shop/en/battery-tubes/675-21700-steel-battery-tube.html http://kudzumods.com/18650-black-tube-340