retird

Moderators
  • Content Count

    2,396
  • Joined

  • Last visited

  • Days Won

    88

Everything posted by retird

  1. retird

    Chip max temp query

    Never have measured the temperature of those chips but surely that silicone sheet would be more than adequate. I've never seen the board temperature in Device Monitor ever get anywhere close to even 150C. (302F)
  2. retird

    cracked screen ?

    Can you let the screen go black than take a close up picture of the screen and post it here?
  3. retird

    Battery balance tap question on Para-series

    Evolv's Data sheet shows 4 cell wiring and pinout for 400 Watt DNA250C.... https://downloads.evolvapor.com/dna250color.pdf To me the 4-cell wiring gives 16.8 volts input between battery + and battery - on the board. Connections G,1,2,3,4 are for cell voltage monitoring. At least that's my understanding. Looks like the data sheet shows the MAX input current is 30A with Peak at 32A. The data sheet also says: The DNA 250C runs on two, three, or four series voltage from lithium polymer or lithium ion batteries, and features battery monitoring and an integrated 2A charger.
  4. You must live outside of the USA so shipping costs vary. Battery doors are not an Evolv Product so be thankful they have them.
  5. retird

    21700 Battery

    It's by design. Just use the 18650 option. Also a 2 cell device defaults to 200 watts by design. These are not problems. This may help.... https://downloads.evolvapor.com/dna250color.pdf
  6. retird

    Best Settings for salt .05

    https://www.evolvapor.com/escribe
  7. retird

    Check atomizer

    You probably tried a different atty also and that the connectivity of the atty to the 510 was solid...... Try a hard reboot... probably won't change anything... Start a ticket with Evolv and explain to them... sent a picture of the board with the ticket..... https://helpdesk.evolvapor.com/index.php?a=add&category=1
  8. retird

    Check atomizer

    Data sheet: https://downloads.evolvapor.com/dna75.pdf Did you measure continuity from each ground (mounting holes) to B-? Did you measure continuity from B- to the the atty ground connection at the atty? Did you measure from the negative atty pad at the board to the negative connection at the atty? Did the board work prior to you drilling the holes bigger?
  9. retird

    Molicel P42A Profile

    Well then I hope somebody here has run the test and WILL HELP ya out...
  10. retird

    Molicel P42A Profile

    I have not seen any posts showing what you desire... I searched this forum in April when this thread started... If you run and create one you might post your results...
  11. I would think you are fine... the Production History is the date the DNA board was programmed...
  12. retird

    Trouble need help - Check Battery

    And a 250C Datasheet if you want more detailed info about the 250C circuit board, error messages https://downloads.evolvapor.com/dna250color.pdf dna250color.pdf
  13. retird

    Trouble need help - Check Battery

    If batteries are fully charged and installed in series you should not be getting a check battery. Contact vendor since it is new. What voltage do you get in Device Monitor in the EScribe Software you have installed on your computer? EDIT....EDIT..... CHANGED VIDEO.... THIS ONE IS BETTER....
  14. retird

    How to empty the memory of the chip

    Ya saved me the time it will take to look at it.... 😉
  15. retird

    How to empty the memory of the chip

    hum, I found many unused wallpapers in a file (not show in theme) and deleted about 5 and it still would't load.... didn't delete any wallpapers being used by the theme tho.... good you got it to load @Wayneo. I'll delete a wallpaper being used and load it.... curious about the theme contents....
  16. retird

    How to empty the memory of the chip

    That .ecig file gives me the same error message that you are getting. I wonder if the Mod Designer has somehow locked the file so it cannot be installed on another 75C device? I also grabbed just the theme out of your .ecig file to try to upload and get the same message. From your .ecig file I see this and you might want to contact them at the e-mail shown... Please let us know what you find out.,....
  17. retird

    How to empty the memory of the chip

    Can you save the .ecig file and attach that file to a post here... I'll look at it... Also attach the Theme file you are trying to upload...
  18. retird

    How to empty the memory of the chip

    Are you trying to upload the .ecig file or just the Theme?
  19. retird

    DNA Go Plus uninstall

    Maybe it is a bad pod? You updated the Orion to the Orion Plus with the software update that Lost Vape put out. The pods that work on the Orion continue to work. Maybe the pod is just bad .. You might check Lost Vape web site to see if they have the original software available. Did you ever have any old Orion Q pods?
  20. retird

    DNA Go Plus uninstall

    It will work....
  21. retird

    cotton always cut in half in tc mode

    Can you post a picture of it?
  22. retird

    Resample resistance when switching profiles?

    Cat out of bag?.... deleted info...... You read it so now deleted to maybe not get banned from ECF....
  23. retird

    Resample resistance when switching profiles?

    "retired" was not me......
  24. retird

    Проблемы с дна 75

    Are your drivers up to date? Could this help????? https://www.drivereasy.com/knowledge/fix-usb-composite-device-driver-error-solved/
  25. retird

    Resample resistance when switching profiles?

    Memories........ 😀 Yep I too started with the Darwin too and have a " herd" of one of each board.... still use the Darwin from time-to-time... As you said... "I really miss seeing Basil, Mike P, Jaquinth, Retird (that's me)and others. I even miss Dr G because when he wasn't beating back the perceived trolls he had great posts Great times, days and people!" Those were good times at ECF before Dr G got booted and some of us got grilled and investigated twice by ECF for false claims...... put a bad taste in our mouths' and I left ECF.