24 files

  1. FCSHARE

    These files are for dry vape devices only.  
    I recommend using the international version of Escribe. 
    Please load as file not as a theme open escribe then open settings from file .
    These files are in the drop down download menu instead of in text area unlike most files.
    Custom profiles  and tweaks to escribe settings have been made. A assortment of custom SS materials is also  preloaded. 
    Be sure to adjust with your mods resistance settings.
    If unsure use of the mod resistance use  these settings (0.004) 
    The case thermal analyzer should be run for best performance on your DNA mods.
    The below files include the case thermals for mod there based on. Other mods user should run this test. 
     
    DNA250 download is based off a Wismec Reuleaux DNA250 .
    Profiles  for iheat, Splinter/ SplinterZ  and Stempod dry atomizers.
     Along with custom settings to puff time etc.
    Included is a custom FC theme in the  DNA250  download
    DNA250  Profiles contain the material cvs and setting.
    iheatDNA.ecigprofile
    SplinterDNA.ecigprofile
    SplinterZDNA.ecigprofile
    StempodDNA.ecigprofile
     
     
    DNA250c based off a Lost Vape Paranormal DNA250c use with 2 battery mods
    DNA75c based off elite
    The maxs output temperature  is set to 465 in this file 
    Maxs puff time 20 seconds 
    If you need to go above the 465 degree  mod safety cutoff in the DNAc you will need to increase maxs output temperature setting. 
    These files have have profiles with custom setting for the Imp, iheat, stempod, splinter/ splinterZ.  
     
    Once  you install these files you can change the themes with out lossing these settings.
     
     
    DNA250c Profiles contain the material cvs and setting. Load as a profile  please be sure to have room in active material files these upload a custom material and if material full  it won't install correct material. Delate nickel or one of others first.  If using an older SplinterZ with the newer 19/19 stems replace the material file with splinter  material  csv file. 
    Stempod.ecigprofile
    SplinterDNAc.ecigprofile
    iheatDNAc.ecigprofile
    SplinterZDNAc.ecigprofile
    IMPDNAc.ecigprofile
     
    Material Files 
    Splinter.csv
    iheat.csv
    Cool.csv
    Warm.csv
    Hot.csv
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    DNA_FCTHEME.ecigtheme
     
    test.ecigtheme
     
    Elitetester.ecigprofile
     
    Hcigar75c.ecig
     
     
     
     
     
     
     
     
     
     
    EliteDNA75c.ecig
    DNA75.ecig

    873 downloads

       (0 reviews)

    19 comments

    Updated

  2. Lost Vape Therion DNA 75C

    This is a fully configured Escribe settings file for the new Lost Vape Therion DNA 75C. The mod basically came unconfigured at the stock board settings which was surprising. This config file has been meticulously configured, and includes the following highlights:
    All 8 profiles configured, with: 3 temp control profiles for favorite atomizer and build combos. My go-to is the Pharaoh RTA as the primary profile, plus the Crown III and the SMOK Baby Beast for emergencies while traveling 5 power-only profiles, at presets of 35, 40, 45, 50 watts Includes my posted DNA 75C Enhanced Default Theme v2.2 which greatly expands the stock theme's capabilities Standard materials plus two SS316L materials, one curve and one TCR set at 0.00094 Mod fully configured: Battery Analyzer run for dual HohmTech Life 3000mah 18.04wh 18650's Cell Soft Cutoff set to lower limit of these 18650's at 2.9v to protect the batteries Input currents set for battery safety based on Mooch's test results Output currents set at DNA 75C spec sheet typical rating Mod internal resistance measured with copper plug at 0.004 ohms Case Analyzer run at 73 degF ambient, averaged over 3 runs Hope everyone enjoys!
     

    3,404 downloads

       (1 review)

    15 comments

    Updated

  3. Lost Vape Triade DNA250c profile after resistance and case analyzer tests

    Lost Vape Triade DNA250c settings (.ecig) after case analyzer and resistance tests on triple VTC6.
    Battery Analyzer run for triple Sony VTC6 3000mah 17.899wh Cell Soft Cutoff set to lower limit of these 18650's at 2.75v Mod internal resistance measured with copper plug at 0.006 ohms Case Analyzer run at 73F ambient.

    356 downloads

       (0 reviews)

    9 comments

    Submitted

  4. Lavabox 75 - Tweaked SS316 Settings

    I tweaked the settings on my lavabox M DNA 75 chip after running the case analyzer.  Please post your changes/ comments. 
    Variables: 
    Lavabox 75 M - DNA 75 Chip
    Geekvape Ammit single coil
    Stainless Steel 26 gauge (from Master of Clouds)
    Sony VTC5 Battery 

    291 downloads

       (0 reviews)

    5 comments

    Submitted

  5. Lost Vape Mirage DNA 75C

    This is a fully configured Escribe settings file for the new Lost Vape Mirage DNA 75C. Highlights:
    All 8 profiles configured, with: 3 temp control profiles for favorite atomizer and build combos. My go-to is the Pharaoh RTA as the primary profile, plus the Crown III and the SMOK Baby Beast for emergencies while traveling 5 power-only profiles, at presets of 35, 40, 45, 50 watts Includes my posted DNA 75C Enhanced Default Theme v2.2 which greatly expands the stock theme's capabilities Standard materials plus two SS316L materials, one curve and one TCR set at 0.00094 Mod fully configured: Battery Analyzer run for iJoy 21700 3750 mAh 40A battery Cell Soft Cutoff set to 2.75V, max sustained discharge at 24A, max peak discharge at 35A for longer cell life Output currents set at DNA 75C spec sheet typical rating Mod internal resistance at 0.0031 ohms, measured with copper plug (actual 0.004 x 80%, minus an extra 0.1 mOhm for kick(s) Built for EScribe Suite International v2.0 SP12 or higher, running beta firmware  v1.1 SP27 or higher Hope everyone enjoys!

    1,064 downloads

       (2 reviews)

    4 comments

    Updated

  6. Evolv DNA 250 Set

    General escribe goodies.
    Case's Thermal balanced
    Check out, lipo Discharge Graph on soft Cutoff too!
    Long life, Puff oriented. Have fun

    1,407 downloads

       (0 reviews)

    2 comments

    Submitted

  7. Lost Vape Paranormal DNA166 (Evolv DNA 250)

    This is the stock .ecig file for theLost Vape Paranormal DNA 166 (Evolv DNA 250), 2 x 18650 batteries mod, providing manufacturer/original configuration as it was out of the box.
    Also have attached separately the original Lost Vape Theme file.

    1,556 downloads

       (1 review)

    1 comment

    Updated

  8. Think Vape Finder DNA 250C default .ecig file

    Default file values for the Think Vape Finder 250C 
     

    486 downloads

       (0 reviews)

    1 comment

    Submitted

  9. NEW ORIGINAL SETTINGS 2019 LOST VAPE PARANORMAL DNA250C

    LOST VAPE DEFAULT SETTINGS PARANORMAL DNA250C 2019

    566 downloads

       (0 reviews)

    0 comments

    Updated

  10. Lost Vape Drone DNA 167 BF mod Settings

    Settings file for the Lost Vape Drone DNA 167 BF mod. Battery analyser run for a pair of Sony VTC5A's. Material profiles from SteamEngine.

    336 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Evolv DNA 75 Color Default Settings

    These are the default settings for the Evolv DNA 75 Color.

    1,265 downloads

       (0 reviews)

    0 comments

    Submitted

  12. Lost vape Paranormal DNA75C

    Original Lost Vape Paranormal DNA75C stock settings (.ecig file)
     

    550 downloads

       (0 reviews)

    0 comments

    Updated

  13. Lost Vape Paranormal DNA75C after test

    Lost Vape Paranormal DNA75C settings (.ecig) after case analyzer , resistence test and VTC6 battery test.
    Battery Analyzer run for dual Sony VTC6 3000mah 17.899wh Cell Soft Cutoff set to lower limit of these 18650's at 2.75v Mod internal resistance measured with copper plug at 0.015 ohms Case Analyzer run at 70 degF \ 21 °C ambient, average over 3 runs Materials and profiles as per my personal use

    354 downloads

       (0 reviews)

    0 comments

    Updated

  14. Vapor Shark DNA 250 Settings

    Here is the default config for the Vapor Shark DNA 250

    229 downloads

       (0 reviews)

    0 comments

    Submitted

  15. VapeCige VTbox 250 Settings

    Here is the default config file for the VapeCige VTBox 250. Please note that none of the profiles are configured properly by default (most are set to nickel and titanium, that's how I got it) so if you use it, be sure to go through and set the presets to your liking.

    262 downloads

       (0 reviews)

    0 comments

    Submitted

  16. Vapedroid Sbody C2D1 factory .ecig file

    C2D1 factory .ecig file sent to me by Sbody

    199 downloads

       (0 reviews)

    0 comments

    Submitted

  17. Volcano Lavabox DNA 200 900mah defaults

    These settings contain the default presets for the Volcano Lavabox DNA 200 using the 900mah LiPo battery.

    89 downloads

       (0 reviews)

    0 comments

    Submitted

  18. Volcano Lavabox DNA 200 1300mah defaults

    These settings contain the default presets for the Volcano Lavabox DNA 200 using the 1300mah LiPo battery.

    117 downloads

       (0 reviews)

    0 comments

    Submitted

  19. Paranormal 75c stock settings

    This is the stock .ecig file for the Lost Vape Paranormal 75C 

    285 downloads

       (0 reviews)

    0 comments

    Submitted

  20. Volcano Lavabox M (Mini) DNA 75 Stock Settings (Out of the box)

    This is the stock .ecig file for the Volcano Lavabox M (Mini) DNA 75 1650 mod, providing manufacturer/original configuration as per out of the box.

    404 downloads

       (0 reviews)

    0 comments

    Submitted

  21. my_default_dna200

    work backup

    435 downloads

       (0 reviews)

    0 comments

    Submitted

  22. Paranormal 250C Default

    Default settings

    396 downloads

       (0 reviews)

    0 comments

    Submitted

  23. themes

    Сборка из разных тем (под себя)
    Samsung q30 3000mah  сrv получена анализатор батарей escribe
    Triade 250c remote.ecigtheme

    22 downloads

       (0 reviews)

    0 comments

    Updated

  24. Hcigar VTinbox BF DNA 75 V_23112017

    HCIGAR VT Inbox DNA 75 by Kronos Version V_23112017
    V1.0 : Settings on Stainless Steel 316 Dual Coils setup w/ Bottom Feed Atom
    features: Temperature control & Wattage control
    Profiles:
    1- ROCK / ROCK- SS316 TC=240C Power=40W Punch=5 PreHeath=50W (temperature dominant)
    2- ROLL / ROLL- SS316 TC=240C Power=45W Punch=6 PreHeath=55W (temperature dominant)
    3- HELL / HELL- SS316 TC=260C Power=55W Punch=7 PreHeath=65W (temperature dominant)
    4- PUMP / PUMP- SS316 TC=280C Power=65W Punch=8 PreHeath=75W (temperature dominant)
    5- ACID / ACID- SS316 TC=275C Power=50W Punch=9 PreHeath=75W (temperature dominant)
    6- POWER CONTROL / PWCT- SS316 TC= no  Power=70W Punch=0 PreHeath=no
    7- RELAXED / CALM- SS316 TC=250C Power=50W Punch=5 PreHeath=60W
    8- NO PREHEAT / NOPH- SS316 TC=250C Power=75W Punch=1 PreHeath=1W
     
    main design: apple style logo/font (three rows)
    preferred with: Flavour chasing / Cloud chasing
    author: KRONOS (link: https://www.facebook.com/KR0NOS )
    club: GIAMBELLINO VAPERZ (link: https://www.facebook.com/groups/Giambevaperz/ )
    city: MILANO
    state: ITALY
    nation: EUROPEAN UNION

    1,303 downloads

       (0 reviews)

    0 comments

    Updated